Welcome Customer !

Membership

Help

Beijing Aiwantis Technology Co., Ltd
Custom manufacturer

Main Products:

instrumentb2b>Products

Beijing Aiwantis Technology Co., Ltd

  • E-mail

    info@avantes.com.cn

  • Phone

  • Address

    Room 120912102609, Building E, Youlehui, Wangjingyuan, Chaoyang District, Beijing

Contact Now

Equipped with a small reflective probe

NegotiableUpdate on 04/03
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin
Overview
For some medical and semiconductor applications that require a very small probe for reflection measurement, Avantes offers two standard diameter probe type reflection probes, with diameters of 1.5 and 2.5mm respectively and a length of 100mm.
Product Details
Equipped with a small reflective probe

For some medical and semiconductor applications that require a very small probe for reflection measurement, Avantes offers two standard diameter probe type reflection probes, with diameters of 1.5 and 2.5mm respectively and a length of 100mm.

The light from the illumination source is coupled into a fiber bundle consisting of six 200 μ m optical fibers through a standard SMA905 connector, which are directly connected to the end of the probe. The reflected light on the surface of the sample enters the 7th 200 μ m optical fiber, which transmits the spectral data to the spectrometer through the SMA905 connector.

The specially designed angle fiber optic bracket (AFH-15) for 1.5 mm diameter reflective probes is very useful, as it enables the reflective probe to perform reflection measurements at 15, 30, 45, 60, 75, and 90 degrees. For more detailed information, please refer to the Reflective Probe Bracket section.

technical data
Fiber bundle 7 optical fibers with a 200 μ m core, 6 optical fibers, and 1 detection fiber, NA = 0.22。 The standard length is 2 meters, and the splitter is located in the middle of the fiber optic cable.
wavelength range 200-2500 nm(UV / VIS / NIR)
connector SMA905 connector (2x)
Probe tip Stainless steel cylinder, 100mm long x 1.5 or 2.5mm diameter.
optical sleeves The optical fiber is protected by a Kevlar reinforced PTFE tube with a PVC sleeve. Outer diameter: 3.8 millimeters
temperature -20 ℃ to 65 ℃
bending radius Bending radius: Short term (a few seconds) 20 millimeters, long term: 120 millimeters


ordering information
FCR-7UVIR200-2-1.5x100 Reflective probe, 1.5 mm diameter, UV/VIS type, 7 x 200 μ m core diameter optical fiber, 100 mm long, with a total length of 2 meters, SMA connector
FCR-7UVIR200-2-2.5x100 Reflective probe, 2.5 mm diameter, UV/VIS type, 7 x 200 μ m core diameter optical fiber, 100 mm long, with a total length of 2 meters, SMA connector