Environmentally friendly plastic water meter, good quality, low price

The working principle of an environmentally friendly water meter: After the water flows into the water meter, it enters the impeller box along the tangent line of the lower row of the impeller box, drives the impeller to rotate, and flows out along the upper row hole of the impeller box. The total amount of water flowing through the water meter is recorded by the reduction gear technology structure through the rotation of the blades. Product features of environmentally friendly water meters: This product has a beautiful appearance, belongs to the green and environmentally friendly replacement product, and meets the conditions for pure water supply. Corrosion resistant, non scaling, long service life, can eliminate pipeline scaling and blockage, as well as yellow spots and rust. Long term use of tap water does not affect the water quality inside the meter and prevents secondary pollution. The specific gravity is only 1/7 of the metal shell, reducing transportation costs; Good toughness and impact resistance. The smooth inner wall and stable size of the product are beneficial for water meter calibration and reducing water pressure loss. Easy installation and reduced installation costs. Effectively reducing manufacturing costs, transportation expenses, and installation costs, lower than metal shell water meters. Installation and use of environmentally friendly water meters: The diameter of the water meter should be selected according to the flow rate of the installation location, and hot water and corrosive liquids should not be used. The water meter should be installed in a place that can avoid exposure to sunlight, freezing, pollution, flooding, and is easy to disassemble and read. The water meter should be installed horizontally, with the dial facing upwards, and the direction of the arrow on the case should be consistent with the direction of the pipeline and water flow. To ensure accurate measurement of the water meter, the faucet should be higher than the water meter. When installing a new pipeline, it is necessary to wash away any impurities such as sediment and dirt inside the pipeline before installing the water meter to avoid any malfunctions. If the water meter is installed at the inlet pipe of the boiler, it should be prevented from being scalded by hot water reflux. When not using water, slight movement on the meter is caused by unstable water flow pressure in the pipeline or other reasons.