Elevator cleaning floor scrubber

Elevator cleaning floor scrubberIt is a cleaning machine that cleans the ground while absorbing and removing wastewater from the site. The use has become very common in various fields in developed countries, especially in places with vast hard surfaces such as stations, docks, airports, workshops, warehouses, schools, hospitals, restaurants, and shopping malls. The cleaning concept of replacing human labor with machinery has deeply penetrated people's hearts. Suitable for various terrazzo, marble, granite, artificial stone, floor tiles PVC、 Fine steel sand, epoxy, etc.

Stop the floor scrubber and water supply system when the floor scrubber is not moving.

2. The vertical workability achieved by the driving floor scrubber can work continuously for up to 3-5 hours.

3. Adopt noise cancellation technology to maintain extremely low sound pressure levels without causing interference to the surrounding environment.

4. The rack is entirely made of die cast aluminum and formed in one go, without any sheet metal parts.

5. The body is made of rotational molding and has undergone appropriate anti-corrosion treatment to protect the frame.

6. Intelligent loading and unloading: The brush system adopts an automatic loading and unloading design, which does not require any tools for loading and unloading.

7. Floating brush disc: The brush automatically adjusts the pressure according to the ground, combined with the water outlet system, for better cleaning effect.

8. Sewage recycling system: The combination of arc-shaped suction scraper and siphon suction pipe design achieves sewage recycling.

9. The absorbent rubber strip can be used on all sides, effectively reducing the cost of use, and can be replaced without any tools.

10. Easy maintenance: The sewage tank can be flipped 90 degrees, and the battery maintenance can be carried out by opening the water tank without any tools.

1. After each use, the sewage tank of the driving floor scrubber should be cleaned and emptied, because the sewage tank of the driving floor scrubber will leave dirt after each work is completed.

2. The brush plate and suction scraper of the driving floor scrubber are both vulnerable parts, and the degree of wear and tear should be checked regularly every week. When the wear and tear of the driving floor scrubber is relatively large, it should be replaced in a timely manner to ensure the cleanliness of the ground and reduce the damage of vulnerable parts to the ground. Generally, the brush plate can be replaced after 50 hours of use, and the suction rubber strip can be replaced after 30 hours. Of course, it can be adjusted according to different usage places based on experience.

3. If the filter screen of the driving floor scrubber is used for a long time, dust will deposit on the filter screen and block it, which will reduce the drying capacity of the filter screen. Therefore, it is important to clean the filter screen at the same time after using the floor scrubber. The suction pipe connected to the suction scraper should also be cleaned regularly to ensure that impurities do not block it.

4. The suction scraper of the driving floor scrubber sucks sewage into the sewage tank through the flow of air. After each use of the driving floor scrubber, sediment will deposit around the suction scraper. Therefore, it is important to clean the suction scraper at the same time after each use of the floor scrubber.

5. When adding water to the water tank before use, it is important to note that the water should be clean and not dirty. If the water added is used, it may cause blockages in the outlet if it is intended for reuse. For example, if there is sand or vegetable leaves in the water used for washing vegetables, it will block the water outlet and cause the water to flow unevenly. Also, the water should be in moderation and not added too much at once for convenience. Before use, tighten the lid of the water inlet. If the water is added excessively and the lid of the water inlet is not tightened. Passing over uneven ground can cause the body of the indoor floor scrubber to become unstable and shake, which may result in water leakage and engine water ingress

6. If the machine is not in use for a long time, the battery can be fully charged. Simply open the battery compartment, twist the positive and negative electrodes, and remove the battery from the cabin. If you don't use the phone for a short period of time, you must regularly charge the battery. You cannot leave it unattended for a month as the battery will run out of power.

7. Regularly check the damage of the floor scrubber plug and power cord to ensure that the floor scrubber does not leak electricity.

Daily maintenance can be easily completed after using the driving floor scrubber, without the need for separate time-consuming and labor-intensive tasks. And your floor scrubber is well maintained, which can extend its service life and save costs.