Electric vehicle charging cable bending test machine

Product Name:TH-5832Electric vehicle charging cable bending test machine

Product Overview:

TH-5832Electric vehicle charging cable bending test machinesatisfyGB/T 20234.1-2015The Connection Device for Conductive Charging of Electric Vehicles1Partial General Requirements "GB/T 33594-2017Electric Vehicle Charging Cables, andGB∕T 11918.1-2014Industrial plugs, sockets, and couplers1part:Technical requirements specified in standards such as General Requirements. Suitable for manufacturers and quality inspection departments of charging stations to conduct bending connection part tests on the "mechanical strength" of power connection cables for charging vehicle plugs and sockets.

This testing machine is mainly used in the quality supervision industry, metal, machinery industry, and cable and wire production and use manufacturers.

Main functions:

1Control method:PLC+Touch screen display:PLCTouch screen display:

Parameter settings: machine control related parameters;

Testing conditions: testing speed, testing frequency, testing angle and direction, control conditions, etc;

Test monitoring: current device operating status, such as actual speed, frequency, angle, display date and time during wire testing;

2Unmanned monitoring: The equipment can automatically determine the continuity of the sample by monitoring the circuit of the sample. When the circuit is detected to be disconnected, the equipment operation test can be paused and an audible and visual warning can be given until it is manually checked and confirmed before continuing the test

3TestingFixture: Cables of different diameters are equipped with appropriate bending curvature fixtures to adjust the bending radius;

4Machine performance: using Kunlun Tong stateLCD+MitsubishiPLC+Panasonic servo motors use imported products for their transmission components, ensuring smooth operation, high torque, high positioning accuracy, long lifespan, and low noise;

5Online monitoring: Points are divided into6Group, each group3For the interface, it can meet the requirements18Simultaneous monitoring of wires, with terminal blocks installed directly above the samples at each workstation for easy cable insertion. The sensing time during monitoring is based on one scanning cycle5Milliseconds, the conduction signal without sampling is used as the basis for judgment.

6Self calibration: The device has a self calibration function, which can self calibrate the zero point to prevent angle deviation

Technical Specifications:

1Testing station: 6workstation,Separate control into two groups

2Test method: upper end fixed, lower end suspended counterweight, sample controlled bending point by adjusting clamping fixture;

3Maximum clamping space:60mm

4Sample speed:0~60time/Minute adjustable

5Bending angle:0±180° Number setting

7Bending radius:According to the demand sideTCustomized swing fixtures for the project12a

8The distance between the load-bearing weight and the bending point:50-1200mmadjustable

9Load weight:50NThe75NThe100NThe150NThe200NCombination weight6set(customizable)

10Control method: Touch screen control

11Counting digits:0-99999999time

12Machine material: Main body: Made of45#High quality steel and aluminum architecture;

Power and transmission: using imported industrial synchronous belts and synchronous wheels;

13Test fixture: Customized according to customer samples, with bi-directional adjustable clamping.

14Motor power:3.0kW

15Safety protection: Integrated safety protection box

16Machine size:W2500*D800*H1800mm

17Power supply:220V,50/60Hz 20A