Electric single beam crane with four levels and 25 square meters seamless sliding contact line

NegotiableUpdate on 05/15

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The electric single beam crane is mainly used for lifting four levels of 25 square seamless sliding contact lines in single beam cranes. The single beam crane has the characteristics of reasonable structure and strong rigidity of the whole machine. The main beam adopts an I-beam box structure, which is used in conjunction with CD and MD electric hoists. It is a light and small lifting machinery. This product is widely used for lifting goods in different occasions such as factories, warehouses, and material yards. It is prohibited to use it in flammable, explosive, or corrosive media.

Product Details

Electric single beam crane with four levels and 25 square meters seamless sliding contact lineYangzhou Tianxiang Electric adopts * technology for production, with seamless sliding contact wires of 3, 4, and 6 poles, which have continuous power supply and oxygen free copper transmission power supply, voltage drop force, good conductivity, good contact, easy installation, less wear and tear, easy replacement, more convenient transportation, less likely to cause damage to the sliding contact wire, and extend the service life.

Electric single beam crane with four levels and 25 square meters seamless sliding contact line，

Environmental conditions for LD electric single beam crane:

1. The power supply of the crane is three-phase AC, 380V, 50Hz;

2. Crane working level: A3~A5;

3. Crane working environment temperature: -20 ℃~+40 ℃;

4. When ordering or signing a contract for a crane, the basic parameters of the machine (rated lifting capacity, lifting height, effective radius, etc.) must be clearly described in order to provide products that meet the working conditions and requirements;

What are the relevant instructions for the normal use of cranes? In recent years, the safety accidents of cranes have been controlled to a certain extent, which is closely related to correct operation. What are the details that need to be paid attention to? In the early stage of normal use of the crane, the operator must carry out preparatory work, which can not only avoid danger, but also timely detect problems. During use, it is necessary to follow the relevant steps. If there are any problems during operation, it should be stopped in a timely manner and the problem should be checked. When the operator malfunctions during the use of the crane, they must not panic or even experience a load situation. If these issues are not taken seriously, the subsequent work will be difficult to carry out, and the proportion of crises may even increase. Relevant measures should be taken seriously, and experience should be continuously accumulated in operation, so that problems can be solved in a timely manner. Otherwise, it cannot be flexibly applied, and work efficiency will not only not be improved, but the probability of errors will even increase sharply. In short, the adverse effects will continue to come one after another. In the early stages of use, good habits should be cultivated so that more attention to details can have a corresponding positive effect on the subsequent work.