Electric paint film friction tester

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The electric paint film friction tester is used to evaluate the wear resistance, scratch resistance (single or multiple scratches), and color transfer (usually camel or abrasion fastness) of products. Both dry wear test and thermal abrasion test can be conducted.

Product Details

one﹑purpose:

█This instrument is used to evaluate the wear resistance and scratch resistance of products(single or multiple scratches) and color transfer (usually camel or abrasion resistance), etc. Both dry wear test and thermal abrasion test can be conducted.

two﹑principle:

█ Place the wooden board with paint film on the platform, clamp and extend the friction head with a clamp according to the standard requirementsBetween 5-10mm, press on top of the wooden board and place the specified weight (350g/piece). You can set the required number of times/minute to run, and perform a 200mm linear reciprocating motion. Pay attention to the degree of wear and tear on the extended length of the friction head. If necessary, pause the operation to observe the sample, loosen the clamp, and extend the extended length of the friction head to continue testing.

threeAccording to the standards:

█定制.

serial number	name	Functional Description	serial number	name	Functional Description
1	foot	Supporting equipment	2	screen	Operation control, display of test data
3	Moving rod	Perform linear reciprocating motion device	4	Load weight	equipped with350g/tablet, a total of 5 tablets
5	sampleclip	Used for clampingsampleMake the wooden board less prone to running and misalignment during the testing process	6	test platform	Used to prevent wooden board samples
7	collet	Used for clamping standard friction heads

IIInstrument specifications:

name	specification
test station	1 piece
load	350g-2100g
test frequency	2-75 times/min
Friction stroke	200mm
Grinding head rubber	CS-10F, CS-10, CS-17, H-18, H-22
counter	LED LCD display can be set from 0 to 9999 times
volume(WxDxH)	60x38x43cm
weight(Kg)	≈25Kg
power supply	1∮ AC 220V 3A

threeInstrument features:

1. Easy to operate, with minimal daily maintenance, capable of automated operation until the end of parameter testing, and overall lightweight.

2. Equipped with test clips, quickly fasten the sample and prevent it from falling off easily.

3. Equipped with an electronic counter, it simulates the test results of manual friction ten times, with high data reproducibility.

4. Used for testing the dry and wet rubbing color fastness of fabrics, suitable for regular or periodic testing.

5. Fixed device with standard friction head.

6. It has power-off protection function and can save current test data.