Product Categories

Jingjia Science and Trade (Kunshan) Co., Ltd

E-mail
jingjia17@sina.com
Phone
13656262369
Address
14-15, Building 3, Henglong Electromechanical City, 567 Xinnan Middle Road, Kunshan City, Jiangsu Province (opposite the New Bus Station on National Highway 312)

Contact Now

ERICHSEN adhesion tester

NegotiableUpdate on 11/24

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Brief description: The Yilixin 295 type grid cutter is a manually operated instrument that can meet all grid testing standards. It consists of a plastic handle and a blade mounted on it, which can be adjusted to a comfortable position for the operator to operate. Different types of cutting heads are available, and one tape that complies with EN ISO 2409 standard is available for selection.

Product Details

The adhesion of the coating on the substrate is not only a physical indicator that describes the bonding performance between the coating and the substrate, but also an important anti-corrosion performance indicator. Because areas with poor adhesion are prone to corrosion, standard grid testing provides a very straightforward method for testing adhesion performance.

The basic principle is to use a series of cutting edges to cut the coating at right angles, and the obtained squares can be evaluated by visually inspecting the coating at the site of substrate rupture. It can also be compared with the grid pattern in the standard.

All 295 # grid cutting instruments are fully supplied, including blade heads installed on plastic handles. Installed in a sturdy plastic carrying case, it also includes a nylon brush and a 2.5-fold magnifying glass. For 295/III single blade blades, a folding ruler is also provided. The instrument also comes with the manufacturer's certificate M.

Ordering Information

standard	film thickness	Knife number x spacing(mm)	model	Item Number
ISO 2409 EN ISO 2409¹)	Up to 60 μ m 60~120μm 120~250μm	6 x 1³	295/I	0019.01.31
		6 x 1⁴	295/II	0019.02.31
		6 x 2	295/II	0019.02.31
		6 x 3	295/III or 295/VI	0019.03.31 (0019.07.31)

ASTM D 3359	Up to 50 μ m 50~125μm	11x1	295/V	0019.05.31
ASTM D 3359	Up to 50 μ m 50~125μm	6x2	295/II	0019.02.31

JIS K 5400 JIS K 6894	Up to 60 μ m 60~120μm Greater than 120 μ m	11x1	295/V	0019.05.31
		6x2	295/II	0019.02.31
		6x3	295/III or 295/VI	0019.03.31 (0019.07.31)

SNV 37111	Up to 60 μ m Greater than 60 μ m	8x1	295/III	0019.03.31
SNV 37111	Up to 60 μ m Greater than 60 μ m	8x2	295/III	0019.03.31

VDA 621-411	Zui up to 60 60~120 Greater than 120	6x1	295/I	0019.01.31
		6x2	295/II	0019.02.31
		6x3	295/III	0019.03.31 (0019.07.31)

ECCA²)	Zui up to 50 Greater than 50	11x1	295/V	0019.05.31
ECCA²)	Zui up to 50 Greater than 50	2x5	295/IV	0019.04.31

ISO 2409-1972 BS 3900:E6 NFT 30-038	Promise	11x2	295/VI	0019.06.31

1. After 1994, the European standard EN ISO 2409 replaced the national standards DIN 53151, BS 3900: E6, NFT 30-38, NEN 5337, and SIS 184172.
2. After the grid test, a deep drawing test can also be conducted (EN ISO 1520). The deep drawing experiment can be completed using the following instruments:

ERICHSEN Cup Convex Tester, Models 200, 202, 202C, or 204
Impact testing device 304 ECCA in accordance with ASTMD 3359
3. For soft substrates.

4. For hard substrates.

Adhesive testing tape:

ASTM 3359 Tape - T1078894; P99 test tape
ISO 2409 tape T9999358 (T1079358);

DIN 53151 Test Tape

Intertape 51596 Test Tape（intertape tm 51596 CIC1150414）

Specification: 25mm × 66m