EMG brake

EMG brake

EMG ELHY? EB series
Product positioning of electric hydraulic brake actuator:
The EB series is an electro-hydraulic actuator unit used for industrial drum or disc safety brakes. Push the brake to open when powered on; When there is a power outage or emergency stop, the built-in spring immediately applies braking force to achieve Fail Safe
）Function.
Performance Range
Boosting power: 120 N -6300 N
Journey: 50 mm -160 mm (different models correspond to different journeys)
Applicable power supply: three-phase 400-690 V, 50Hz
Operating temperature: -25 ° C to+40 ° C (optional low/high temperature version)
Structure and Protection
Three phase asynchronous motor drives the vane pump, and the oil cylinder piston outputs linear thrust
Standard protection level IP56
Provide C5-M anti-corrosion coating on the surface; Optional QPQ hardening treatment for piston rod
The base and pull rod can rotate 90 degrees, making it easy to install in multiple directions
Optional Accessories
Throttle valve or damping spring: adjust the lifting time
Quick descent valve: Shorten brake closing time
Travel/position switch, liquid level monitoring, mechanical limit
Additional brake springs or buffer components
Product advantages:
Precise control: Through advanced electro-hydraulic control technology, the braking torque and braking speed can be precisely adjusted to meet the precise braking requirements under different working conditions. For example, in some situations where high braking accuracy is required, such as precision machining equipment, automated production lines, etc., the EB series thruster can achieve precise positioning and braking, ensuring the stability of the production process and product quality.
Efficient and energy-saving: Adopting efficient motor and hydraulic system design, it achieves efficient conversion and transmission of energy. The impeller of the pump is directly installed on the motor shaft, reducing energy loss and lowering energy consumption by 3 while meeting braking requirements. In addition, this series of thrusters may also have energy-saving mode or intelligent control function, automatically adjusting power consumption according to actual working conditions, further improving energy utilization efficiency.
Strong Durability 3: The hydraulic system is filled with hydraulic medium, reaching the height of the injection port. This design not only reduces wear and extends the service life of the equipment, but also is suitable for high-frequency, long-term continuous operation applications. The motor housing has cast feet that can be firmly fixed in various industrial environments and can adapt to harsh working conditions such as high temperature, humidity, and high dust.
Typical Applications
Industrial cranes, port machinery, bulk conveying equipment, wind power, and other applications.

EMG brake

EBC100/30 X36
EB2000-60II
EB500-60II
EB1250-60 II
EB-2000/60-Ⅱ-W6
EBC100/30 X36
ED80/6
EDC 100/30
EB3000-60II
13/0559117
EB3000-60II
EB1250-60II
EB2000/60Ⅱ-W6
EB2000-60II
EB500-60II
EB300-50II
EB500-60II