EM1401 Electromagnetic Ultrasonic Thickness Gauge

NegotiableUpdate on 09/20

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The EM1401 electromagnetic ultrasonic thickness gauge is used to measure the thickness of steel structures such as steel pipes, steel troughs, and flat steel, as well as aluminum structures and other metal material structures. The EM1401 electromagnetic ultrasonic thickness gauge does not require the use of coupling agents or prior surface treatment during measurement. The operating interval between the sensor and the measured object is up to 6 mm. Rust proof film, salt layer, and any other insulation coating (paint, varnish, enamel, plastic, etc.) can be used as operating intervals.

Product Details

Product Features

EM1401Non contact thickness gauges are used to measure the thickness of steel structures such as steel pipes, steel troughs, flat steel, as well as aluminum structures and other metal material structures. No coupling agent is required during measurement, and there is no need for surface treatment in advance. The operating interval between the sensor and the test piece is up to6 mmRust proof film, salt layer, and any other insulation coating (such as paint, varnish, enamel, plastic, etc.) can be used as operating intervals.

When the sensor is tilted, the test index displayed by the sensor is very reliable. Unlike traditional thickness gauges with piezoelectric converters, this product does not require the sensor to be fixed in a specific position.

EM1401The thickness gauge is equipped with a bright color display screen, allowing users to observe on the screenA scan.

EM1401The thickness gauge has three thickness measurement modes:
–Automatic mode;
–Manual mode, in * *the middle of a doorUtilize maximum thickness measurement;
–Manual mode, available in two modesthe middle of a doorUse two maximum limits for thickness measurement.

Technical Specifications

Thickness range (steel structure)	2 mm-60 mm
measurementprecision	0.04 mm
The operating distance between the sensor and the tested component	Gundam6 mm
The inclination angle of the sensor relative to the vertical operation of the tested surface	±25degree
Common Sensitivity	Diameter of 9mmThe flat bottomed drilling hole
Operate the curvature radius of the surface of the test piece	≤10 mm
Number of large measurements per second *	16
Adjustable range of sound speed	1 m/sIncrement, Range1000…9999 m/s
Working frequency range	3…5 MHz
Continuous working time for one charge	6hour
mode	Radial polarized shear waves on the surface plane of the test piece
Working temperature range	-20…+50 °C
size	232 x 135 x 44 mm

EM1401 Electromagnetic Ultrasonic Thickness Gauge EM1401 Electromagnetic Ultrasonic Thickness Gauge EM1401 Electromagnetic Ultrasonic Thickness Gauge EM1401 Electromagnetic Ultrasonic Thickness Gauge EM1401 Electromagnetic Ultrasonic Thickness Gauge EM1401 Electromagnetic Ultrasonic Thickness Gauge