EM1301 Electromagnetic Ultrasonic Thickness Gauge

NegotiableUpdate on 09/20

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The EM1301 electromagnetic ultrasonic thickness gauge is used to measure the thickness of steel structures such as steel pipes, flat steel, steel bars, as well as aluminum structures and other metal material structures. No coupling agent is required during measurement, and no surface treatment is needed in advance. The operating interval between the sensor and the tested part is up to 3 mm. Rust proof film, salt layer, and any other insulation coating (paint, varnish, enamel, plastic, etc.) can be used as operating intervals. The signal-to-noise ratio level of EM1301 electromagnetic ultrasonic thickness gauge is higher than EM2210, therefore, when the operating distance is wide, the operational reliability is higher.

Product Details

EM1301The thickness gauge is used to measure the thickness of steel structures such as steel pipes, flat steel, steel bars, as well as aluminum structures and other metal material structures. No coupling agent is required during measurement, and there is no need for surface treatment in advance. The operating interval between the sensor and the test piece is up to3 mmRust proof film, salt layer, and any other insulation coating (such as paint, varnish, enamel, plastic, etc.) can be used as operating intervals.EM1301The signal-to-noise ratio level is higher thanEM2210Therefore, when the operating distance is wide, the operational reliability is higher.

andEM2210comparison,EM1301The bright color display screen can showA scan. EM1301Function of:
‒利用doorOperation;
‒Utilize one or twodoorautomatic/Manual thickness measurement;
‒CloseAGC(Automatic gain control);
‒Select coherent accumulation times, probe pulse frequency, narrow pulse times, and pulse frequency;
‒saveScan data through USBInterface transmission to computer

Technical Specifications

The allowable tilt angle of the thickness gauge relative to the vertical surface of the test piece	±25degree
The inclination angle of the sensor relative to the vertical operation of the tested surface	±25degree
Thickness range (steel structure)	2 – 60 mm
measurementprecision	0.04mm
mode	Radial polarized shear waves on the surface plane of the test piece, Direct input of sound waves
Sensor aperture	13mm
The operating distance between the sensor and the tested component	Gundam3mm
Number of large measurements per second *	30
Working temperature range	-20…+50 °C
Adjustable range of sound speed	Increment, Range1000…9999 m/s
Working frequency range	3…5 MHz
Continuous working time for one charge	8hour
size	131 x 237 x 45 mm

EM1301 Electromagnetic Ultrasonic Thickness Gauge EM1301 Electromagnetic Ultrasonic Thickness Gauge EM1301 Electromagnetic Ultrasonic Thickness Gauge EM1301 Electromagnetic Ultrasonic Thickness Gauge EM1301 Electromagnetic Ultrasonic Thickness Gauge