EJA510/530 Absolute Pressure Transmitter

NegotiableUpdate on 09/12

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

EJA510A/530A absolute pressure transmitter Yokogawa EJA510A absolute pressure transmitter and Yokogawa EJA530A pressure transmitter are used to measure the pressure of gases, liquids, and vapors, and then convert them into 4-20mADC current signals for output

Product Details

EJA510A/530A absolute pressure transmitter

YokogawaEJAThe 510A absolute pressure transmitter and Yokogawa EJA530A pressure transmitter are used to measure the pressure of gases, liquids, and vapors, and then convert them into 4-20mADC current signals for output. The Yokogawa EJA510A pressure transmitter and Yokogawa EJA530A pressure transmitter can also communicate with each other through the BRAN controller, CENTUM CS/μ XL, or Rosemount HART 475 controller for setting and monitoring.

Specification of EJA510A/530A

		EJA510A/EJA530A direct installation absolute pressure and pressure transmitter (The following measurement results are all data from EJA510A)
		A membrane box	B membrane box	C membrane box	D membrane box
measurement range		0~200kPa (0~29psi)	0~2MPa (0~290psi)	0~10MPa (0~1450psi)	0~50MPa (0~7200psi)
Measurement range		10~200kPa (1.45~29psi)	0.1~2MPa (14.5~290psi)	0.5~10MPa (72.5~1450psi)	5~50MPa (720~7200psi)
precision		±0.2%	±0.2%	±0.2%	±0.2%
Protection level		IP67，NEMA 4X， And JIS C0920 immersion proof type
Explosion proof specifications		FM，CENELEC ATEX，CSA，IECEx
output signal		4~20mA DC or FOUNDATION? Fieldbus or PROFIBUS PA two-wire digital communication
power supply		BRAN and HART: 10.5~42V DC (intrinsic safety type: 10.5~30V DC) Fieldbus: 9~32V DC (Intrinsic Safety Entity Mode 9~24V DC, Intrinsic Safety FISCO Mode 9~17.5V DC)
ambient temperature		-40-85 ℃ (-40~185 ℉) (ordinary type) -30~80 ℃ (-22~176 ℉) (with built-in indicator)
process temperature		-40-120 ℃ (-40~248 ℉) (ordinary type)
Maximum overvoltage		4MPa (580psi)	4MPa (580psi)	20MPa (2900psi)	60MPa (8500psi)
install		Direct installation/2-inch pipe installation
Material of liquid receiving components	Capsule	Hastelloy C-276
	Process connector	SUS316L， Hastelloy C-276
shell		Aluminum alloy or SUS316 stainless steel (optional)

EJA510A/530A Selection Table

Item 1: Output signal

-D	4-20mA DC/BRAN protocol digital communication
-E	4-20mA DC/HART protocol digital communication

Item 2: Measurement range (membrane box)

A	10-200KPa
B	0.1-2MPa
C	0.5-10MPa
D	5-50MPa

Item 3: Material of liquid receiving parts

S	SUS316 Hastelloy C-276
H	Hastelloy C-276 Hastelloy C-276

Item 4: Process Interface

4	1/2NPT internal thread
7	1/2NPT external thread
8	G1/2DIN 16 288 external thread
9	M20X1.5DIN 16 288 external thread

Item 5:-

Item 6:-

-0

Item 7: Electrical Interface

0	G1/2 internal thread, one electrical interface
2	1/2NPT internal thread, two electrical interfaces, no blind plugs
3	Pg13.5 internal thread, two electrical interfaces, no blind plugs
4	M20 internal thread, two electrical interfaces, no blind plugs
5	G1/2 internal thread, two electrical interfaces, one blind plug
7	1/2NPT internal thread, two electrical interfaces, one blind plug
8	Pg13.5 internal thread, two electrical interfaces, one blind plug
9	M20 internal thread, two electrical interfaces, one blind plug

Item 8: Hidden Display Table

D	Digital display table
E	Digital display strap measurement range setting button
N	none

Item 9: Installing the bracket

E	JIS SECC 2-inch pipe
F	JIS SUS304 2-inch pipe
N	none