- Phone
-
Address
2A04, Building B2, Yunsheng Science Park, No. 11 Spectral Middle Road, Huangpu District, Guangzhou City, Guangdong Province
Product Categories
Guangzhou Xijiang Instrument Equipment Co., Ltd
Dynamic Dilution Device
NegotiableUpdate on 05/06
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The dynamic dilution instrument is controlled through a touch screen or PC software, and the system realizes the switching of sampling bypass, zero gas and standard gas flow paths, as well as precise control of zero gas and standard gas flow, to complete the dilution preparation of single or mixed gases with different concentrations.
Product Details
Dynamic Dilution DeviceThrough touch screen or PC software control, the system realizes the switching of sampling bypass, zero gas and standard gas flow paths, as well as precise control of zero gas and standard gas flow, completing the dilution and preparation of single or mixed gases with different concentrations.
|
|
1 Atmospheric pre concentration host
Three stage refrigeration rapid heating systemSemiconductor electronic integrated cold trap can effectively remove CO2, O2, and other pollutants from the airH20 interference without losing the specified polar compounds in the method, capture temperature:~40 ° C. Cold trap can be built in at mostThree low-temperature and three rapid heating devices are used to achieve low-temperature water removal and remove adsorbed airCO2、O2、H2O, Capture compounds between C2-C16 in the air and transfer them into gas chromatography through valvesAnalyze in GC or gas chromatography-mass spectrometry (GC-MS), switch to reverse blowing high-temperature cleaning mode after injection, and maintain atmospheric pre concentrationReduce the system's low background. Capture trap3-channel rapid heating control range: room temperature -400 ° C with increments of 1 ° C (heating rate) 3000 ° C/min。 Built in high-definition7-inch touch screen control, user-friendly graphical interface, easy to learn and use. It can achieve single machine operation,Can be used with any brand of gas chromatography orGC-MS combination. Online recording function for testing parameters of each sample, can record the actual desorption process parameters of each sample tube,Convenient for users to understand the analysis process of samplesBetter control of experimental conditions optimization and traceability.
|
2 Su code can automatic sampler
Can be configured with one or two12 digit 1-6L Su code tank automatic sampler. Multiple injection functionThe same Su code control can achieve up to 9 repeated concentrated injections, effectively improving parallel detection capability. Equipped with channel reverse cleaning functionIt can eliminate the residual pollution from the previous time. Multi position switching valve and transmission pipeline have heating functionEliminating sample retention. |
|
|
|
3 tank cleaning instrumentEquipped with heating functionTemperature range: room temperature -120 degrees Celsius, temperature control accuracy:+1 ° C,Equipped with a high flow vacuum pumpExtraction rate per minute: 3000ml/min. |
Product Features | Product Features
All sample pipelines and fittings are made of inert stainless steel or FEP material.
Standard gas flow control pressure difference and gas resistance calculation calibration, using high inert components throughout the process to meet the preparation of H2S and other sulfides and corrosive gases (DDK-3S type).
Zero gas (dilution gas) flow control stainless steel digital mass flowmeter, flow range 0-2L/min, accuracy+/-1%.
Controlled by system software, the built-in solenoid valve switches between sampling, zero gas, and standard gas pipelines.
Connected to the chromatography system through an internal network port, controlled by PC software, it can perform up to 20 points of automatic calibration or testing to meet the detection needs of different quality control samples.
Through the touch screen on the front panel, users can directly control the built-in 8 dilution ratios or dynamically change the dilution ratios.
They are all using Taitong (some companies)
Resolve your backup advantages
Provide technical support for installation, debugging, and training
Taitong technical engineers can provide on-site technical guidance and communication. After on-site communication, installation, debugging, and on-site acceptance testing can be carried out within 2 hours. Installation, debugging and acceptance completed, on-site
Provide a solution. Training on usage and operation, after passing the acceptance inspection and being put into operation, regularly organize relevant activities
Personnel undergo training.
Ensure scientific management of delivery time and traceability of production progress
quality control
Incoming inspection and control, each finished product is tested and inspected to be qualified before leaving the factory
Layer by layer inspection, the finished product must pass 52 tests and pass the inspection before leaving the factory
Factory live shooting
Legitimate manufacturers provide greater assurance
CNC machining center
High quality supervision, product development and upgrading capabilities, and customizable activation devices with different functions
Service Process
Quickly understand Taitong thermal analysis and find solutions suitable for the industry
