Dust free wood crusher

The dust-free crusher is a new type of crusher independently developed by Zhengzhou Jiulong Company based on years of work experience. Compared with traditional crushers, the new type is more reasonable and can achieve more favorable environmental protection promotion, and use green to indicate the future policy. Changing the traditional design principle of using negative pressure fans to extract finished products and then process the airflow is not scientific.

Application of dust-free wood crusher:

The dust-free wood crusher is mainly used for processing materials such as pine, miscellaneous wood, poplar, cedar, and raw bamboo, and is more suitable for sawdust processing in edible mushroom culture media. At the same time, the scrap crusher can also be used for cutting fibrous straw like materials such as bamboo, thatch, corn stalks, and sorghum stalks. It can process all kinds of branches, boards, Flat noodles, round center wood with smaller diameter, leftovers, wood chips, bamboo, cotton poles, and other materials into sawdust and wood filament products at one time. It has the advantages of low investment, low energy consumption, high productivity, good economic benefits, convenient use and maintenance, etc.

Dust free wood crusher video:

The dust-free wood crusher will generate a portion of air volume during crushing, and using a negative pressure fan will make the air volume even more difficult to handle. As long as there is air, there will be dust, and the stronger the wind, the more difficult it is to handle. Due to the long diameter of the dust-free crusher, we chose two 55KW motors to rotate a large shaft together. This effectively utilizes the power of the motors to drive the dust-free wood crusher, which is also a design highlight to increase production.

From the appearance, the hammer wood crusher is almost identical to the scrap crusher and corner crusher. The scrap crusher and corner crusher produced by our factory are evolved from the hammer type wood crusher, with only slight changes to the internal structure. They are designed to crush furniture factory scraps, small wooden blocks, small wooden boards, plywood, small branches, corner materials, edge skins and other wood materials into sawdust or even finer, with a fineness of about 60 mesh, eliminating the problem of secondary crushing.