Dry mist humidifier

NegotiableUpdate on 10/18

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

A dry mist humidifier can be called a soda water mixing humidifier or a two fluid humidifier. It is designed by fluid mechanics for gases and liquids. Adopting a two-stage atomization method, the pot body sprays the air-water mixture from the central hole through the siphon principle, achieving the first atomization; Then mix with the gas coming out from the nearby nozzle to achieve a second atomization.

Product Details

HUAYUN dry mist humidifierworking principle

Adopting a two-stage atomization method, the pot body sprays the air-water mixture from the central hole through the siphon principle, achieving the first atomization; Then mix with the gas coming out from the nearby nozzle to achieve a second atomization. Achieve ultrafine atomization effect, with an average particle diameter of 8.5 microns and a humidification capacity of 0.6-17 liters/hour. HUAYUN dry fog humidifier is a national patent product with a special design. Through high-precision nozzle processing and manual deburring, the air consumption of this product is only 140l/min under the working pressure of 3 bar and the flow rate of 10L/H spray, which saves more than 35% of the air consumption compared with the same domestic product; Each humidifier covers an area of approximately 100 square meters when the air is still on site at a height of 4 meters.

HUAYUN dry mist humidifierfeature

The nozzle can be made of Teflon or SS303 stainless steel;

Standard fog volume 10L/H, maximum spray volume 17L/H;

The average droplet size is 8.5 microns;

Imported pressure regulating valve, stable pressure regulation;

Imported waterway shut-off valve, easy to maintain;

Patent structure, no dripping;

Using small water storage tanks that are difficult for bacteria to reproduce;

The pot body contains sufficient fiberglass, which is durable and does not deform;

HUAYUN dry mist humidifierstructure

Siphonic structure, finer atomized particles;

Special internal design and easy installation and maintenance of humidifier;

Install or remove the nozzle, only rotate the nozzle cover 45 °;

Easy to disassemble nozzle cap, which can be easily turned by hand;

Equipped with a cleaning needle, used for cleaning when the liquid cap is blocked;

Two types of nozzle materials, PTFE and stainless steel;

Chemical resistant polypropylene+fiberglass as the main material;

HUAYUN dry mist humidifierIntroduction to nozzle

The nozzle is processed using high-precision one-time molding technology;

The nozzle channel is smooth and unobstructed, saving compressed air;

The angle of the air hole is consistent for convection, the atomization angle is beautiful, and the droplet size is precise;

A dual atomization system that generates fine droplet sizes and prevents clogging;

Water is sprayed out from the central hole and then cut by convection through the side holes to form ultrafine particles;

HUAYUN dry mist humidifierSpecification selection

		Gas flow rate L/min			Liquid flow rate L/H			Shao Te average value μ m
Air pressure bar		2.5	3	4	2.5	3	4	2.5	3	4
nozzle	2.5N	30	35	45	2.3	2.5	2.6	9.6	8.5	7.6
model	4.3N	30	35	45	4.0	4.3	4.6	46	35	28

	main body	polypropylene
Material Science	nozzle	Stainless steel SS303/polytetrafluoroethylene
Material Science	packaging	foam box
connect	air circuit	Rc1/4（F）
connect	waterway	Rc1/8（F）
weight	A nozzle	≈210g
weight	Four nozzles	≈250g

HUAYUN dry mist humidifiereffect

Effective humidity control for larger spatial areas
By coordinating with the reasonable design of the on-site environment, humidity control can be achieved over a wide range of areas.

Effectively eliminate static electricity
Eliminate static electricity, improve production efficiency, and enhance quality.

High energy-saving effect
A cooling effect of about 2 ℃ can reduce the load on air conditioning. Compared with traditional steam humidification methods, it can achieve significant energy-saving effects.

Help for health
Using a dry mist humidifier can reduce absenteeism rates.
When the humidity is controlled above 50% RH, the number of bacteria causing influenza in the air will be greatly reduced, thus creating a comfortable working environment. In addition, increasing the body's moisture retention can maintain a certain perceived temperature. In an environment with a room temperature of 20 ℃, you will feel a sensation of 25 ℃, effectively saving air conditioning energy.