Dissorp solvent deaerator, up to 8 liters of solvent per use

The perfect solvent transportation station! Only 90 dissolution tests are needed to recoup costs! DissoProp X8 can quickly and safely remove gases from solvents. Fully compliant with USP, EP, FDA, GLP/GMP standards. Capable of processing up to 8 liters of solvent at once. By weight distribution, there is complete repeatability and traceability. Key advantage: Automatic preparation and distribution of solvent. The solvent is composed of water and acid or buffer, filtered, mixed, heated, and degassed in a vacuum environment, and distributed into up to 8 separate dissolution cups with an accuracy of less than ± 5 grams. This process will be accurately monitored and the allocated capacity will be printed or sent to the computer for confirmation records each time. The mixing of acids requires a second liquid pipeline for precise addition of concentrated hydrochloric acid (up to 36%). The danger associated with acidic solvents is reduced. There is an embedded filter rod in the filter injection pipe that is easy to replace. The filtering performance will be automatically detected by monitoring the total filtered capacity and final flow resistance. When the performance of the filter cannot meet the requirements, the system will remind the user to replace the filter. Heating a special continuous flow heater will heat the solvent to a specified temperature (± 2 ° C) before degassing. This will promote degassing and save a lot of time when heating in the dissolution apparatus. Stir and mix an electronic stirrer to transport the solvent to the storage tank and ensure the concentration of acid. Efficient degassing is achieved by placing a warm solvent in a vacuum environment at atmospheric pressure greater than 700mbar and maintaining stirring. Rapid injection and dispensing of 8 liters of solvent can be completed in just 15 minutes. To save time, the solvent can be prepared during the experimental process. Each dissolution cup can be directly injected through a dispensing tube. High precision dispensing (± 0.5%) takes about 35 seconds and can dispense 1000ml. The dispensing capacity is 400-1000ml, saving time and money. With DosaPrep X8 solvent mixing, degassing and preheating will also be carried out without setting up. Accurately distribute the solvent into each dissolution cup, saving time and eliminating unnecessary operations. Preheating can save time in experiments and increase efficiency. The safety in the laboratory is ensured due to the automated process, especially during acid preparation and solvent distribution, which guarantees personal safety in the experiment. Only 90 dissolution experiments are needed to recoup costs! "