- Phone
-
Address
508B, Building D, Xinyuan Science and Technology Park, No. 97 Changping Road, Changping District, Beijing
Product Categories
Beijing Spectrum Century Technology Development Co., Ltd
Displacement sensor calibrator
NegotiableUpdate on 05/06
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The WS-DISP1 displacement sensor calibrator is designed for calibrating displacement sensors. It can be used to calibrate eddy current, inductive, pull rod, and rope type displacement sensors. The distance between the calibration disk and the sensor can be adjusted by rotating the rod. The dial gauge can display the displacement, and the displacement can be calibrated by measuring the displacement and the sensor output signal (voltage).
Product Details
WS-DISP1Displacement sensor calibrator |
1Introduction
the productIt is designed for calibrating displacement sensors, which can be used to calibrate eddy current, inductive, pull rod, and rope type displacement sensors. The distance between the calibration disk and the calibrated sensor can be adjusted by rotating the rotating rod. The dial gauge can display the displacement amount, and measuring the displacement amount and the sensor output signal (voltage) can calibrate the displacement sensor.
2Technical indicators
type number |
WS-DISP1 |
|
calibration range |
mm |
0~20 |
Precision of dial gauge |
mm |
0.001(digital readout) |
Calibrate the disk size |
mm |
Ø30TheØ60, thick4 |
Calibration disk material |
45#steel |
|
Calibration instrument material |
LY12aluminum alloy |
|
ruler inch |
mm |
310×110×85 |
Matching fixed sensor bucket5aM12×1TheM14×1TheM16×1TheM18×1TheM20×1 | ||
3Ordermodel
serial number |
name |
model |
quantity |
remark |
1 |
Displacement sensor calibrator |
WS-DISP1 |
1 |
|
Similar Product Recommend
