Digital magnetic (electric heating sleeve) mixer

Welcome to our store. Wishing you a pleasant shopping experience!

1、 ZNCL-TS/T type Digital magnetic (electric heating sleeve) mixerCharacteristics of 100ml-10000ml:

1. Using an electric heating sleeve for heating, it has the characteristics of large heating area, uniform heating, and fast temperature rise, with the highest temperature

The temperature can reach 380 ℃.

2. The temperature control adopts fuzzy PID control algorithm, dual screen digital display, self-tuning function, and has measurement capability

High measurement accuracy, low temperature surge, single touch operation, internal and external thermocouple temperature measurement, thyristor control output,

160-240V wide voltage power supply, with circuit breaker protection function.

3. Heating and stirring can be performed on 50-20000ml standard or non-standard reaction bottles.

4. Adopting the German PAPST series DC brushless motor, it has stable performance, low noise, and long service life,

No sparks generated.

5. The shell adopts a one-time flame retardant reinforced PBT injection molded shell, which is heat-resistant, corrosion-resistant, and

Good insulation performance.

The 6.30 ° inclined control panel is suitable for both sitting and standing perspectives.

7. Infinite speed regulation, smooth at low speeds and strong at high speeds.

2、 ZNCL-TS/T typeDigital magnetic (electric heating sleeve) mixerInstructions for using 100ml-10000ml:

1. Fix the upright pole in the screw hole above the mixer, adjust the height of the cross clamp, and use a universal tool

Fix the reaction bottle with a clamp, put in a suitable stirrer, plug in the power supply~220 ∨, and turn on the switch.

2. Adjust the "mixing" knob clockwise and adjust it to the appropriate position according to the speed display for mixing.

When stirring large or viscous solutions, the knob can be adjusted appropriately to increase the stirring force.

4. Adjust the temperature control knob clockwise and adjust it to the appropriate position for heating and stirring as needed.

5. When displaying temperature, a glass thermometer or digital thermometer can be used for auxiliary measurement.

6. Temperature setting: Press and hold the "▲" or "▼" keys to quickly set the desired temperature

The required heating temperature is 100 ℃. When the green light is on, it indicates heating, and when the green light is off, it indicates stopping. The microcomputer will

Determine the heating amount based on the temperature difference between the set temperature and the current temperature, ensuring that there is no temperature shock and the heating is done in one go,

And maintain a balance of supply and heat dissipation under a temperature difference of ± 1 ℃ between the set value and the displayed value, making the heating process easy to complete.

7. Self tuning function, starting the self-tuning function can adjust the heating section or heating power to match the solution

When there is no regularity, the heating time is the shortest, the flushing temperature is the smallest, and the balance is the best, but changing the heating medium or heating strip

The post adjustment should be reset.

8. Start self-tuning: Press and hold the shift key "?" for 5 seconds, and the setting window number will flash to enter the self-tuning state,

After three temperature surges, the number stops flashing, indicating the end of self-tuning and can be used, but self-tuning needs to be done at the beginning

Used at the beginning of heating, the self-tuning performed midway is inaccurate.

9. There is a rubber plug underneath the mixer to protect the external thermocouple socket from corrosion, rust, and conductivity

Connect the internal wire for use. If unplugged, the internal probe will disconnect and the machine will stop working. When using an external thermocouple, this plug should be removed

Unplug and store, insert the external thermocouple plug into the socket and lock the nut, then place the stainless steel probe into the solution

Temperature controlled heating is carried out in the liquid.

10. The appliance is equipped with a break protection function. When the thermocouple connection is poor, the display window will show "hhhh"

The green light goes out, and the appliance stops heating. It needs to be checked before use.

3、 Notes on ZNCL-TS/T intelligent magnetic (electric heating sleeve) mixer:

1. Please ensure safe use by grounding the wire.

2. In order to extend the use of the product, all motors of the magnetic stirrer are equipped with fan cooling function, hence the addition of

During thermal experiments, especially high-temperature heating tests, the instrument cannot be used solely for heating purposes. The motor must be adjusted to rotate

Or rotate at medium speed (or idle) to prevent damage to motors and electrical appliances caused by high temperature radiation. If the motor cannot

When starting the rotation, it is necessary to promptly seek repair from a dealer. Otherwise, failure to follow the requirements may result in damage or loss, and will not be accepted

responsible

When the high-temperature heating is completed, please turn off the heating first and wait for a few minutes for the remaining temperature to dissipate before turning off the stirring.

4. The heating part has a high temperature, so be careful when working to avoid burns.

5. In case of wet hands, liquid spillage, or long-term exposure to high humidity conditions causing electrical leakage, it should be promptly addressed

Dry or sun dry before use to avoid danger.

6. When used for the first time, there is white smoke and odor coming out of the sleeve, and the color changes from white to brown and then to white

This is a normal phenomenon, as glass fiber contains oil and other compounds during the production process, it should be placed in a well ventilated area,

After disappearing for a few minutes, it can be used normally.

When using an electric heating sleeve with a capacity of over 7.3000ml, there is a creaking sound due to differences in the structure of the furnace wire and the voltage regulation pulse of the thyristor

Related to the charging signal, you can use it with confidence.

When liquid overflows into the sleeve, please quickly turn off the power and place the electric heating sleeve in a ventilated place until it is dry

Use to avoid the danger of electric leakage or electrical short circuit.

When not in use for a long time, please store the electric heating sleeve in a dry and non corrosive gas place.

10. Please do not use empty heating or dry burning.

When the environmental humidity is relatively high, there may be induced electricity transmitted through the insulation layer to the outer shell. Please make sure to ground the ground wire,

To avoid electric leakage, pay attention to ventilation.

12. Relative humidity: 35% -85% (without condensation).

13. Insurance tube with a diameter of 5 × 20 15A.

Technical parameters:

After-sales service

1. The product has a one-year warranty period, during which parts can be replaced free of charge (excluding non quality issues).

2. Lifetime maintenance of the product, replacing spare parts only requires paying the cost.

Note: Customized services can be provided according to customer requirements.