Welcome Customer !

Membership

Help

Junteng Electronic Instrument Co., Ltd., Mudan District, Heze City
Custom manufacturer

Main Products:

instrumentb2b>Products

Digital display constant temperature electric heating sleeve SKM type round bottom, 1000ml

NegotiableUpdate on 12/31
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin
Overview
Digital constant temperature electric heating sleeve SKM type round bottom, 1000ml widely used for sample baking, drying, and other temperature tests.
Product Details

Digital display constant temperature electric heating sleeve SKM type round bottom, 1000mlUsing high-efficiency insulation and energy-saving materials for filling can quickly achieve temperature control, and the temperature can be heated to over 300 ℃; This machine is easy to operate and safe to use, and is a tool for biology, genetics, medicine and health, environmental protection, biochemical laboratories, analysis rooms, education and scientific research.

IIDigital display constant temperature electric heating sleeve SKM type round bottom, 1000mltechnical indicators

Model/Indicator SKM-250 SKM-500 SKM-1000 SKM-2000
Capacity 250ml 500ml 1000ml 2000ml
heating power 200W 400W 600W 800W
temperature control Intelligent temperature controller for temperature control


Temperature control range Room temperature~400 degrees


power supply AC220V 50Hz


III Safety instructions before use

1. Please read the instruction manual carefully before use.

2. The electrical rated parameters of the power socket provided by the user should be greater than the electrical rated parameters of the machine, and there should be good grounding measures.

3. Before replacing the fuse, ensure that the power supply has been cut off.

4. It is strictly prohibited to move the machine during normal operation.

5. Do not allow children to approach or enter the machine cavity to prevent accidents

6. It is strictly prohibited for objects to collide with the machine.

7. Do not use in places with high temperatures and direct sunlight.

8. If any abnormal situation is found, the machine should be shut down immediately and the power should be cut off

4 Instructions for use: 1. Clean the exterior of the container containing the test sample and place it in an electric heating jacket.

2. Connect the power supply, turn on the power switch, and once the indicator light is on, set the desired temperature on the intelligent temperature controller.

3. After completing the work, cut off the power and place the temperature control knob and speed control knob in the lowest position.

4. Clean the machine.