Digital Ceramic Water Absorption Tester TXY-400

1、 Overview:
The TXY digital display ceramic water absorption tester is an instrument that uses vacuum method to measure the water absorption of daily ceramics, architectural and sanitary ceramics, and electrical ceramics. Meets the national standard GB/T3810.3-2016 of the People's Republic of China for the determination of water absorption of building and sanitary ceramics, as well as the determination conditions of GB3299-82 for the determination of water absorption of daily-use ceramics. This instrument can also be used to measure the water absorption rate of bricks, tiles, cement products, etc.

2、 Main technical parameters:
1. Vacuum degree: adjustable from 0.1Mpa ± 0.005Mpa
(Using imported digital vacuum gauge with a resolution of 0.1KPa and display control accuracy of 0.1KPa)
2. Test volume: 250mm x 300mm, 320mm x 300mm, 400mm x 400mm
3. Vacuum holding time: 0-120 minutes, continuously adjustable
4. Water injection time: 0-99 minutes, 59 seconds continuously adjustable
5. Soaking time: 0-99 hours and 59 minutes, continuously adjustable
6. Power supply: 220V 180W
3、 Structure and composition of digital ceramic water absorption tester:
The TXY digital display ceramic water absorption tester adopts an electromechanical integrated structure, consisting of a vacuum container, a water circulation vacuum pump, an inlet solenoid valve, a drain valve, a water container, and a digital controller. The water circulation vacuum pump has special advantages such as low operating noise, low damage, and low power consumption, which make the instrument have superior performance.