Diesel lubrication friction and wear tester

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The diesel lubrication friction and wear tester can be used for rapid detection of the friction and wear performance of fuel and lubricating oil, such as friction and wear detection of diesel, engine oil, grease and other oil products under boundary lubrication state. It can be widely used in refineries, quality inspection agencies, research institutes and other units to evaluate the lubrication performance of diesel, and can also be used for testing the lubrication performance of other oil products or materials. $r $n Adaptation standards: ASTMD 6079 SH/T0765, ISO12156 $r $n This equipment adopts an industrial control computer for real-time acquisition, feedback, and control, and real-time drawing of test curves for various parameters, curve and data export, and

Product Details

Diesel lubrication friction and wear tester

Test force: 200 ± 1g, can be set between 0.1-1kg

2. Test force indication error: ± 1%

3 reciprocating frequency: 50 ± 1Hz, can be set between 10-200Hz

4 reciprocating stroke: 1 ± 0.02mm, can be set between 0.1-2.5mm, accuracy 0.001mm

5 diesel oil sample volume/m 1:2 ± 0.2

6 gasoline oil sample volume/m1: 6 ± 0.2

7 Liquid oil temperature: 60 ± 2 ℃, can be set between room temperature and 260 ℃, with an accuracy of ± 1 ℃

Test ball: diameter 6mm, material AISI E-52100 steel, Rockwell hardness HRC58-66, surface roughness Ra<0.05 μ m

9 test pieces: processed in accordance with AISI E-52100 specification round steel, with a Vickers hardness of "HV30" level value of 190-210, and a surface roughness Ra<0.02 μ m

10 Maximum Friction Force: 30N

11 Experimental environment relative humidity: 20%~70% ± 3%

Relative temperature of experimental environment: 17 ℃ -30 ℃± 1 ℃

13 Noise: ≤ 70dB (A)

Within the temperature range of 10 ℃ -35 ℃, the relative humidity should not exceed 80%

15 correctly installed on a stable foundation or workbench;

16. No corrosive media, vibration or interference around

17 Input voltage: 220V ± 10% Power supply: 220V/16A

18. Overall dimensions of the host (length X width X height): approximately 260x300X400. Overall dimensions of the control box (length X width X height): approximately 500X400x530

19Net weight of testing machine:50Kg