Dichloroethane analyzer

^{Product Introduction of Dichloroethane Analyzer}

^{Product Overview}

^{TDLB-MT6XDichloroethane analyzerUsing a 3.5-inch high-definition color screen to display concentration in real time, three display modes can be switched to detect and analyze gas concentration in pipelines, confined spaces, and atmospheric environments. It can also detect gas leaks and detect over 500 types of gases.}

^{Execution standards:}

^{GB 15322.3-2019 "Portable combustible gas sensors with a measurement range of 0-100% LEL"}

^{GB 3836.1-2010 General Requirements for Electrical Equipment Used in Explosive Gas Environments}

^{GB 3836.4-2010 "Essence of Electrical Equipment for Explosive Gas Environments - All Types" i ""}

^{Product Features}

^{1. Anti splash, dustproof, explosion-proof, shockproof, intrinsically safe circuit design, anti electricity, anti electromagnetic interference}

^{2. The high-definition 3.5-inch high-definition color screen displays real-time information such as concentration, alarm, time, temperature, temperature, storage, communication, printing, battery level, charging status, etc. The menu interface uses high-definition simulation icons to display the function names of each menu.}

^{3. Adopting a 5400mAh x2 high-capacity rechargeable polymer battery, it can work continuously for a long time.}

^{4. It can simultaneously detect 1-6 gases.}

^{Main technical parameters}

^{1. Gas detection: toxic gases, oxygen, carbon dioxide, flammable and explosive gases, TVOC, etc. 1-6 gases can be combined freely, and can be expanded to more than 18 gases.}

^{2. Application scenarios: Petroleum, chemical, pharmaceutical, natural gas distribution, storage flue gas analysis, air treatment, and all other situations that require portable and rapid detection of gas concentration.}

^{3. Detection range: 0~1, 10, 100, 1000, 5000, 50000, 100000ppm, 200mg/L 100% LEL, 20%, 50%, 99.999%, 100% Vol optional, other ranges can be customized.}

^{4. Resolution: 0.01ppm or 0.001ppm (0-10ppm); 0.01ppm (0~100ppm), 0.1ppm (0~1000ppm), 1ppm (0~1000ppm or above), 0.01 mg/L (0~200% mg/L), 0.1% LEL, 0.01%, 0.001% Vol}

^{5. Detection principle: electrochemistry, catalytic combustion, infrared, thermal conductivity, PID photoionization, etc. are determined according to the gas type, range, on-site environment, and user requirements,}

^{6. Detection accuracy: ≤ 2% F.S (higher accuracy can be customized)}

^{7. Linearity: ≤± 2% Repeatability: ≤± 2% Uncertainty: ≤± 2%}

^{8. Response time: T90 ≤ 20 seconds Recovery time: ≤ 30 seconds}

^{9. Working environment: Temperature: -40 ℃~+70 ℃, Humidity: ≤ 10~95% RH}

^{10. Sample gas temperature: -40 ° C~+70 ° C}

^{11. Working power supply: 3.7VDC, 5400mAhx2 large capacity rechargeable polymer polymer}

^{Material battery}

^{12. Display mode: 3.5-inch high-definition color screen}

^{13. Detection method: Built in pump suction measurement}

^{14. Alarm mode: audible and visual alarm, can be set to turn off the alarm}

^{15. Communication interface: Universal Serial Bus (charging and communication)}

^{16. Data storage: Large capacity data storage, supporting expansion.}

^{17. Protection level: IP66}

^{18. Explosion proof type: Essential AN full type}

^{19. Explosion proof mark: [Exia lCT4 Ga Explosion proof certificate number: CNEx16.3091]}

^{20. Dimensions: 255x210x125mm (LxHxW),}

^{Customization: 420x210x125mm (LxHxW)}

^{21. Weight: 3.2Kg, customized according to actual weight}

^{22. Optional functions: temperature and humidity detection, wireless transmission (GPRS, Bluetooth, WiFi, 433M, LoRa), RS485 output, RS232 output, Bluetooth printing, all-in-one printer, one click SOS call for wind speed, pressure difference}