Dew point transmitter DPT-810 series

manufacturer: Feimet Corporation of the United States
Introduction: The D PT-810 dew point transmitter is an on-site dew point analyzer produced using the most advanced nano microporous metal oxide film dew point sensor. It can quickly and accurately measure the moisture content of gases within the dew point temperature range of -110 ℃ to+20 ℃.
Main Features：
Measurement range -110 ℃~+20 ℃
Measurement accuracy ± 2 ℃
Fast, accurate, and reproducible
Small size and light weight
Has 4-20mA output
IP68 stainless steel casing
Reverse polarity protection
3/4 "-16 interface thread with sealing ring
Unit display, default dew point temperature at factory, optional ppmv, etc
Technical Specifications：

humidity sensor	Range: -110 ℃ to+20 ℃ Accuracy: ± 2 ℃	Response time: 3 minutes with 95% step change Flow rate:>1 LPM
environment	Simple and fast installation	No additional tools required
circuit	Two wire system with 4-20mA output and 20-28VDC Resolution: 1pF produces less than 0.01 ℃	Cables that meet CE certification requirements must be shielded and can be used in hazardous areas
machine	Adopting a fully stainless steel casing with IP67 protection Dimensions (overall), including connectors: Length (82.6mm) Diameter (41.3mm); Thread 3/4 "-16 and 14mm × 1.25mm	Weight: 0.17kg Pressure: 5000 PSIA (345 bar)
Operating temperature range	-20℃～+60℃
Main features	Dew point units include: ℃ (dp), ppmV Output: 4-20mA current output; NIST traceable calibration

Application fieldPetrochemical, power, pharmaceutical, industrial gases, heat treatment, aviation, natural gas, drying equipment, and medical.