Deviation meter - Deviation inspection instrument - Deviation measuring instrument

NegotiableUpdate on 12/29

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The deflectometer is mainly used to detect the radial, circular, and end face circular runout of shaft and disk components. It can also be used to detect the radial, circular, and end face circular runout of shaft and disk components, with high accuracy and easy operation.

Product Details

The purpose of the deflectometer: This instrument is mainly used to detect the radial and end face circular runout of shaft and disc workpieces. This product has the advantages of novel design, beautiful appearance, high accuracy, and easy operation. Using this instrument can greatly improve work efficiency and measurement accuracy.

Deflection instrumentMain technical parameters: 1. The radial circular runout of the 60 ° cone surface of the Mohs 2 ejector pin is ≤ 0.005mm2, the parallelism (horizontal and vertical directions) of the ejector pin axis to the guide rail within a range of 100mm is ≤ 0.006mm3, the large diameter of the tested part is 270mm-400mm, and the measured lengths are 300mm, 500mm, 1000mm, and 1500mm


New type of deflectometer		tabletDeflection instrument

Export QualityDeflection instrument		standardDeflection instrument

Deflection instrumentOperating procedures for use:
1) Before inspecting the workpiece, a L=400MM inspection rod and a dial gauge should be used to checkDeflection instrumentPerform accuracy verification and use only after ensuring compliance.
2）Deflection instrumentIt is a precision testing instrument, and the operator must be proficient in the operation skills of the instrument, carefully maintain and upkeep it, and designate a dedicated person to use it.
3）Deflection instrumentThe equipment must always be kept in good condition, and the installation of the equipment should be balanced and reliable. The guide rail surface should be smooth and free of bumps and scratches. The coaxiality tolerance of the two top pins should be less than 0.02mm in both the a and b directions within the range of L=400mm.
1、 When inspecting workpieces, they should be handled with care and no tools or workpieces are allowed to be placed on the guide surface.
2、 A designated person should be assigned to review at the end of each monthDeflection instrumentConduct precision testing and inspection to ensure the equipment is in good condition, and keep records of the testing.
3、 After the completion of the workpiece inspection, the instrument should be maintained immediately. The guide rail and top pin sleeve should be oiled and rust proofed, and the surrounding environment should be kept clean.

Packaging for the deflection inspection instrument: wooden box (can also be customized according to user requirements)Deviation inspection deviceThe color:Deviation inspection deviceGenerally, green and blue are selected (or according to user requirements)

Specifications	center height	measure diameter	precision
			Parallel direction μ m	Vertical direction μ m
300	100	≤140	≤8	≤5
300	170	≤270	≤8	≤5
500	170	≤270	≤8	≤5
500	250	≤400	≤8	≤5
1000	170	≤270	≤10	≤8
1000	250	≤400	≤10	≤8
1500	170	≤270	≤16	≤15
1500	250	≤400	≤16	≤15