DYNY-200 Voltage Withstand Test Device for Electric Energy Meter

NegotiableUpdate on 03/23

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Product Overview: The DYNY-200 voltage withstand test device for electric energy meters adopts a combination or separation design of high voltage output and test components. The test process can be manually or automatically carried out, which well meets the requirements of voltage withstand test for electric energy meters. It is a new generation of ideal multi meter voltage withstand test equipment for electric energy meters. The equipment meets the following standards and regulations: JJG596-2012 Electronic AC Energy Meter JJG307-2006 Electromechanical AC Energy Meter JJG795-2004 Voltage Endurance Tester

Product Details

Functional Features

◎ Types of voltage withstand tests: ground test for the tested meter, voltage and current test for the shell, and auxiliary terminal test for the shell;

The voltage withstand tests of each meter are independent of each other, with independent functions of voltage withstand cut-off, leakage current detection, and breakdown alarm. The voltage withstand breakdown of one meter does not affect the continuation of the voltage withstand tests of other meters;

The device has an audible and visual alarm function for breakdown, indicating the level of breakdown;

The hanging method adopts a crimping type meter holder, which does not require tightening the screws of the electric energy meter

Technical Parameter

Number of hanging watches:6A three-phase energy meter,6A single-phase energy meter,Or according to user requirements

◎ Power supply:220V±22V，50Hz±2.5Hz

◎ Voltage resistant output:0～4000V， ±2%, Frequency:50Hz, Capacity:500VA；

Leakage current:5mA， ±5%；

◎ Timing range:0～99s， ±5%；

◎ Insulation resistance: Voltage and current circuit to ground>10MΩ

◎ Operating environment: Temperature:0℃～40℃； Humidity:40%～80%R.Ｈ.