DSP-LBCM03A Test Coating Machine DSP-LBCM03A

NegotiableUpdate on 04/25

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The DSP-LBCM03A test coating machine is carefully designed for coating wet films on different substrates. It can repeatedly and continuously prepare smooth, flat, and defect free test samples. After being put into the market, the equipment has been favored by many well-known enterprises, research and development institutions, and colleges and universities. The DSP-LBCM03A test coating machine is often affected by factors such as coating speed and pressure applied to the coating applicator, resulting in inconsistencies in manually applied coatings, especially among different individuals. This makes it difficult to compare test results between samples. stem or root of plants

Product Details

mechanical properties

DSP-LBCM03AExperimental coating machine

Brief introduction

The DSP-LBCM03A experimental small coating testing machine is carefully designed for coating wet films on different substrates. It can repeatedly and continuously prepare smooth, flat, and defect free test samples. After being put into the market, the equipment has been favored by many well-known enterprises, research and development institutions, and colleges and universities.

2、 Purpose:

Due to the main factors affecting the coating film, such as coating speed and pressure applied on the coating applicator, inconsistencies often occur in manually applied coatings, especially between different people, which makes it difficult to compare test results between samples. Our company's automatic coating machine allows operators to easily apply wet films on different substrates, greatly improving the reproducibility of the coating.

3、 Main parameters:

1. Coating base size: 600mm × 360mm

2. Effective coating size: width 300mm, length 400mm

Vacuum disk size: 330mmX450mm (optional)

3. Coating rate: 0-200cm/min

4. Total power: 200W 1600 (with heating device optional)

5. Power supply: 220V 50Hz

6. Coating method: Scraper coating/Coating rod coating (optional)

7. Coating rod length: 400mm

8. Coating thickness: 0-5mm

9. Coating accuracy: Scraper type 0.001mm

10. Vacuum degree: 0-0.9Mpa

4、 Product Features

1. The test speed, pressure, and coating length can be adjusted, and it can also achieve coating rod coating and scraper coating, making the operation more convenient, with a wider range of applications and higher coating accuracy

2. The machine can be equipped with heating and vacuum adsorption functions, which can quickly dry samples and smoothly adsorb special materials, while also coating materials with temperature requirements.