DSP-DM100 rolling cutter slitting machine DSP-DM100

NegotiableUpdate on 04/25

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The DSP-DM100 rolling cutter slitting machine is the only semi-automatic slitting machine in China that adopts international standards and is designed, produced, and accepted in full accordance with the technical requirements and acceptance standards of Japanese and American superior slitting machines. The DSP-DM100 rolling cutter slitting machine is a practical brick cutting tool set that is simple, practical, and efficient. The tool adjustment time is about 2 minutes short, and the small cutting width can reach 8mm, which makes up for the limitations of other tool sets that have insufficient cutting width

Product Details

mechanical properties

DSP-DM100 rolling cutter slitting machine

1Introduction to Equipment Functions and Mechanisms

1. The DSP slitting machine is the only semi-automatic slitting machine in China that adopts international standards and is designed, produced, and accepted in full accordance with the technical requirements and acceptance standards of Japanese and American superior slitting machines.

2This device is mainly used for excellent cutting of positive and negative electrodes.

3. Brick Knife Group:

A、Practical brick knife setSimple, practical, and efficient, with a tool adjustment time of about 2 minutes and a small cutting width of up to 8mm, making up for the limitations of other blade components with insufficient cutting width

4. RHBZD slitting machineSuperiority:

Overall level is superior domestically

Some professional skills have reached or exceeded the international advanced level

A: Point and shoot machine: a good human-machine interface.

B: Stability structure: The basic workpiece has undergone special processing and will never deform.

C: Superior slitting performance: slitting burrs ≤ 15um
Cutting arc 0.15mm/500mm

There are no obvious wavy edges that can affect the quality of winding

3、 Main technical parameters of the equipment:

Serial Number	project	parameter
1	Motor power	The equipment is powered by a 60W variable speed motor
2	Cutterbed	Use copper sleeve to rotate (with internal oil groove)
3	surface	Made from 12mm steel plate processing Surface hard coating treatment
4	rack	The rack is made of 30mm square welded 250 ° high-temperature baking paint
5	control system	Use button operation
6	Distance between two knife holders	300mm
7	Tool Diameter	83mm
8	The number of cutting tool strips multiplied by	3 items
9	Splitting speed	adjustable
10	The width of the segmented polarizer is	56mm * 3 pieces, 58 # * 3 pieces
11	power supply	AC220V
12	*Large section speed	35 r/min
13	Normal cutting speed	10 r/min
14	power	200W
15	Cut thickness	Copper foil: 6-10 μ m Aluminum foil: 10-20 μ m Total thickness: 40-200 μ m
16	Pole length	400-650mm
17	Cutting burrs on the polarizer	≦15 um
18	Cutting width	30～65mm
19	Bending degree of polarizer	≤0.15mm/500mm