DH-JD series horizontal screw belt mixer

Brief description

The horizontal screw belt mixer consists of a U-shaped container, screw belt stirring blades, and transmission components; The spiral blade has a double-layer structure, with the outer layer of spiral collecting materials from both sides to the center, and the inner layer of spiral conveying materials from the center to both sides, forming convective mixing. The screw belt mixer has a good effect on the mixing of viscous or cohesive powder particles, as well as the mixing of liquid and paste materials added to the powder particles. The cylinder cover can be made into a fully open door for easy cleaning and product replacement of the equipment.

Main features

This model is a horizontal cylinder with a symmetrical distribution structure of single axis double screw belts. The mixer barrel is U-shaped, and there is a feed port on the top cover or the upper part of the barrel, which can be equipped with a spray liquid adding device according to user needs. The cylinder is equipped with a single axis rotor, which is composed of a shaft, cross brace, and screw belt.
The bottom center of the cylinder is equipped with a pneumatic (manual) flap valve, and the circular arc valve is tightly embedded in the cylinder, flush with the inner wall of the cylinder, without material accumulation or mixing dead corners. The reliable edge strip seal ensures no leakage during frequent opening and closing.
The open type spiral belt structure generates greater shear motion on the material compared to the continuous spiral belt, and can create more vortices in the flow of the material, accelerating the mixing speed and improving the mixing uniformity.
A jacket can be added outside the mixer cylinder to cool or heat the material by injecting cold and hot media into the jacket; Cooling is usually pumped into industrial water, while heating can be done by introducing steam or electrically heated heat transfer oil.

Main parameters