DANFOSS/Danfoss motor 151B3003 original brand new stock

DANFOSS/Danfoss motor 151B3003 original brand new stock

Feature Description

The performance characteristics of Danfoss cycloidal motors include smooth operation over the entire speed range, stable working torque over a large speed range, and high starting torque

High return oil pressure (high-pressure seal) and high efficiency when there is no oil drain pipe

Long lifespan, sturdy, and compact design under Ji end working conditions

High radial and axial load-bearing capacity · Suitable for open-loop and closed-loop hydraulic systems · Suitable for a variety of different hydraulic media

Instructions for use: Danfoss is at a high level in the manufacturing of low-speed high torque cycloidal motors. We can provide over 3000 different product variants and sizes of cycloidal motors (including various shaft forms).

The specifications (rated displacement) of the motor range from 8 cm3 [0.50 in 3] to 800 cm3 [48.9 in 3] per revolution. Speed range: The minimum specification can reach 2500 min-1 (rpm), and the maximum specification can reach 600 min-1 (rpm). The maximum working torque ranges from 13 N-m to 2700 N-m [24.000 lbf in] (peak), and the maximum output power ranges from 2.0 kW [2.7 hp] to 70 kW .

Introduction to the relevant knowledge points of DANFOSS hydraulic motors:

1. From the perspective of energy conversion, hydraulic pumps and hydraulic motors are reversible hydraulic components. Inputting working fluid into any type of hydraulic pump can turn it into a hydraulic motor operating condition; On the contrary, when the main shaft of the hydraulic motor is driven to rotate by external torque, it can also become a working condition of the hydraulic pump.

2. Because they share the same basic structural elements - a sealed and periodically variable volume and corresponding oil distribution mechanism. However, due to the different working conditions of hydraulic motors and pumps, their performance requirements are also different, so there are still many differences between hydraulic motors and pumps of the same type.

3. Firstly, the hydraulic motor should be able to rotate in both forward and reverse directions, thus requiring its internal structure to be symmetrical;

4. The speed range of hydraulic motors needs to be large enough, especially with certain requirements for their low stable speed. Therefore, it usually uses rolling bearings or hydrostatic sliding bearings;

5. Secondly, because the hydraulic motor works under the condition of input pressure oil, it does not have the ability of self-priming, but it needs some initial sealing to provide the necessary starting torque.

DANFOSS/Danfoss motor 151B3003 original brand new stock

151B3000

151B3001

151B3002

151B3003

151B3004

151B3005

151B3102

11165335

151B3108

151B3103

151B3104

151Z3023

151Z3025

OMT400 151B3004

OMT250 11173855

OMS200 151F2399

OMS160 151F0503

OMS315 151F0506

OMSS315 151F0541

OMS125 151F0502

OMPX50 11185771

OMP32 151-0641

OMR200 151-0715

OMR160 151-0714

OMR315 151-0717

OMR80 151-0711

OMR100 151-0712

OMR250 151-0716

OMP200 151-0615

OMP160 151-0614

OMPX160 11186705

OMP80 151-0611

OMP100 151-0612

OMP250 151-0616

OMP125 151-0613

OMPX125 11185743

OMP400 151-0618

OMR80 151-0411

OMT200 151B3001

OMT250 151B3002

OMP315 151-5008

OMP160 151-0604

OMP200 151-0605

OMP400 151-0618

OMP32 151-0641

OMV630 151Z8217

OMV630 151B3108

OMV800 151B3109

OMTS250 151B3038

Shanghai Chending Automation Equipment Co., Ltd. is located in Jing'an District, Shanghai. It is a trading company engaged in the operation of automation instrument spare parts and hydraulic pump valves; Focusing on the fluid field of industrial transmission automation in China. Our main products include CNC modules, servo motors, programmable controllers, sensors, pneumatic components, industrial instruments and meters, solenoid valves, plunger pumps, hydraulic components, etc. The operating brands include: B&R, Siemens, Bentley Bently, Airtec Pneumatic, Aventics, Rexroth, ATOS, DUPLOMATIC, Parker Parker, Eaton EATON VICKERS and other brands. The company adheres to the concept of putting entrepreneurs first, relying on technology for development, managing for efficiency, and putting service first. For the value of the vast customer base, for the benefit of the enterprise, and for the development direction of employee opportunities. Our philosophy is to make successful businesses our customers and our clients successful businesses. The company provides sales services and has also established a service system to provide guidance and assistance for the problems and difficulties encountered in the development of the enterprise. We believe that through our continuous efforts and pursuit, we can achieve mutual benefit and win-win results with small and medium-sized enterprises! We warmly welcome friends from all walks of life to communicate and negotiate business with each other.