Fat analyzer-SZF-06ABrief Introduction
The SZF-06A series fat analyzer uses the Soxhlet extraction principle and weight measurement method to determine fat content. Dissolve fat in organic solvents, use extraction method to separate fat from the solvent, then dry, weigh and calculate the fat content. The SZF-06 series fat analyzer is designed reasonably, with stable performance, high accuracy, easy operation, and time-saving. The measurement results comply with the national (GB5512-85) standard, and all indicators and performance meet the requirements of imported similar products. It is an ideal equipment for measuring fat in industries such as food, oil, and feed.

Fat analyzer-SZF-06AIt mainly consists of three parts: heating extraction, solvent recovery, and cooling. During operation, the heating temperature can be adjusted according to the boiling point of the reagent and the ambient temperature. The sample is repeatedly soaked and extracted during the extraction process to achieve rapid measurement.

Fat analyzer-SZF-06ACharacteristics:
1. Digital temperature control, timing, and alarm when needed;
2. Small size, fast water bath heating speed, and good heating uniformity;
3. All use ground glass joints to avoid the problem of rubber sealing rings being deformed and leaking due to ether.

Fat analyzer-SZF-06ATechnical indicators:

l. Measurement range: Grains, feed, oilseeds, and various fatty products with oil content ranging from 0.5% to 60%.

2. Test samples: 6 pieces

3. Power supply voltage: AC220V, 50HZ

4. Electric heating power: 1000W for water bath heating

5. Temperature control range: Room temperature -600 ℃

6. Dimensions: 760 × 680 × 230

7. Weight: 25Kg