Cross double pull testing machine

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Testeable types: compression, tension. Loading force range: Xtrip DS30-30KN to 30KN. Xtrip DS100-100KN to 100KN. Xtrip DS200-200KN to 200KN

Product Details

Basic Parameters

X-axis tensile force	Xtrip DS30 -30KNto30KN Xtrip DS100 -100KNto100KN Xtrip DS200 -200KNto200KN
X-axis drive structure	Screw hydraulic composite drive, hydraulic tension closed-loop locking, precision positioning of screw
X-axis force resolution	10N
X-axis force hydraulicassistantloading method	Feedback from X-axis load sensor，Hydraulic proportional loading
Maximum displacement of X-axis	≥ 200mm, X+axis ≥ 100mm, X-axis ≥ 100mm
X-axisdisplacementresolution	0.01um
X-axis speed range	0.01um-1500um/s， The uniaxial stretching rate can be independently set
X-axis displacement accuracy	0.1um
X-axis spline pre tightening method	Hydraulic fixture automatic clamping, adjustable pre tightening force, uniform pre tightening, adjustable pre tightening rate
Application method of X-axis force	Vertical to the Y-axis
X-axis tensile force monitoring	X+load sensor, X-load sensor
Y-axis force	Xtrip DS30 -30KNto30KN Xtrip DS100 -100KNto100KN Xtrip DS200 -200KNto200KN
Y-axis drive structure	Screw hydraulic composite drive, hydraulic tension closed-loop locking, precision positioning of screw
Y-axis force hydraulicassistantloading method	Feedback from Y-axis load sensor，Hydraulic proportional loading
Y-axis force resolution	10N
Maximum Y-axis displacement	≥200mm，Y+ 轴≥100 mm，Y- 轴≥100mm
Yaxisdisplacementresolution	0.01um
Y-axis maximum speed range	0.01um-1500um/s， The uniaxial stretching rate can be independently set
YAxis displacement accuracy	0.1um
Y-axis spline pre tightening method	Hydraulic fixture automatic clamping, adjustable pre tightening force, uniform pre tightening, adjustable pre tightening rate
Application method of Y-axis force	Vertical to the X-axis
Y-axis force monitoring	Y+load sensor, Y-load sensor
XY biaxial displacement loading ratio	Adjustable CNC settings
XY biaxial load loading ratio	Adjustable CNC settings
Sample size range	X轴： 120mm-300mm； Y轴120 mm-300mm
Force plane	horizontal stretching
Stretching method	Central positioning, biaxial stretching
Optical DIC measurement interface	Directly above, full-size observation
Load value output interface	Dual channel 0-10V linear voltage signal
Data transmission method	X-axis and Y-axis dual channel load displacement curve
Collecting curve channels	Xtrip data acquisition software can record dual channel load displacement curves
voltage	AC220V，≤16A
Size and Quality	Xtrip DS30 1100KG Long 1360mm wide 1360mm high 1350mm Xtrip DS100 1200KG Length 1560mm, width 1560mm, height 1350mm Xtrip DS200 1800KG Length 1560mm, width 1560mm, height 1350mm
Configurable attachments	High temperature box, low temperature box, hydraulic automatic fixture, manual fixture, full degree of freedom fixture

Specific technical requirements

1. Bidirectional four hydraulic power stretching structure,X+AxisX-AxisY+AxisY-The shaft is an independent hydraulic drive system that can independently control the direction, speed, and tension of motion.

2. XAxis andYThe axial displacement stretching ratio can be programmed, and the set ratio is0.01-10

3. XAxis andYThe axial load tension ratio can be programmed, and the set ratio is0.01-10

4. XtripCorresponding outputs of data collection softwareX-AxisX+AxisY-axisY+Axial tensile displacement load curve and generationEXCELdata table

5. Combination stretching structure, hydraulic provides stretching force, precision screw achieves precise positioning, and the smallest step displacement is0.01um.

6. Stretching mechanism: An independent piston hydraulic cylinder applies stretching thrust and forms a closed-loop control system with displacement sensors to ensure the proportional progress of the system's high thrust and stretching displacement

8. The output signal of the tensile force direct load sensor does not require feedback from the oil chamber pressure sensor or conversion of piston area, and there is no theoretical error in the thrust resistance of the tensile cylinder

9. Hydraulic fixture system:X+AxisX-AxisY+AxisY-The axis is equipped with independent hydraulic fixtures, with adjustable clamping force and a clamping force range of0-20KN

11. Set pre tightening mode and stretching mode: Pre tightening mode is used for initializing the sample clamping standard, and the starting value of stretching mode data can be set; Stretch modeXThe axis is the active axis,YThe shaft is a driven shaft,YAxis according toXAxial stretching displacement for relative proportional displacement motion

12. Configure optical measurement synchronization trigger signal interface;X-andY-The axle load value signal can output dual channels0-10VProportional voltage signal

14. X+AxisX-AxisY+AxisY-Modular design of axis system, convenient for system maintenance and calibration

15. Reserved space for high-temperature heating device in the center of the machine, convenient for users to expand high and low temperature stretching forming in the later stage

16. Test bench emergency stop switch, convenient for emergency braking and stopping the machine

17. The control software can be remotely connected to the platform through a network cable, and can be used in conjunction with cameras to remotely operate all experiments, parameter settings, and data collection

Optional Attachment 1:High temperature box

1. Internal space of high-temperature box: long100mmwide100mmtall100mm

2. Heating temperature range: room temperature-600℃，PIDAdjust.

3. Placement method: Horizontal placement, adjustable level and height

4. Quality of upper insulation cover: lower than30kg

5. Top observation window size: diameter100mm

6. The upper part of the high-temperature box is equipped with an optical measurement system bracket, which can directly mount opticsDICmeasurement system

7. XtripThe software can synchronously collect temperature changes during the testing process, and can choose to collect two temperature time change curves