Continuous dust monitoring system

NegotiableUpdate on 04/01

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Continuous dust monitoring system

Product Details

Continuous dust monitoring system

Product Overview:

S Y H G -6000The ultra-low emission dust continuous monitoring system is a high-temperature heat tracing extraction dust monitoring system developed by the company based on years of research and development of smoke detection technology. Unlike conventional in-situ scattering dust meters,S Y H G -6000Remove the flue(chimney)The dust inside is extracted at a constant speed and measured in a dust measurement module with high-temperature tracing throughout the entire process, with a detection lower limit as low as0.05mg/m3It is not affected by water vapor and has the characteristics of accurate measurement. Suitable for low-temperature and high humidity flue gas applications with ultra clean emissions and wet desulfurization, meeting the atmospheric pollutant emission standards of thermal power plants（GB 13223-2011）.

characteristic:

●Using laser forward scattering method to detect dust concentration, with a low detection limit; High sensitivity, not affected by vibration, no dust contamination,

High reliability;

●High temperature tracing is used throughout the entire process, and there are no cold spots in the entire flow path, making it suitable for high humidity environments. The water vapor is heated into a gaseous state without affecting the instrument

Effective measurement of dust by the device, while preventing dust from clumping and blocking the air path when encountering water;

●Performing equal power and constant speed sampling can accurately measure and meet the technical requirements for smoke and dust sampling（HJ/T48-1999）；

●Support automatic timed blowback, clean the flow path, and avoid dust blocking the sampling tube and flow path;

●Support automatic zeroing and on-site manual range calibration;

●The accompanying gas path is connected by a card sleeve, which is easy to disassemble, clean and maintain;

●Modular design allows for individual replacement of measurement units and display units;

●Capable of chimney platform and outdoor installation, simple structure, reliable operation, and long-term operation;

●No consumables, low operating costs, long maintenance cycles;

●Design intelligent, integrated sampling, measurement, and display units that can be connected to monitoring systems to achieve early warning.