Contec COMS-1500/980 oil mist separator from Germany

Contec COMS-1500/980 oil mist separator from Germany has been deeply involved in industrial filtration for more than 50 years. As an exclusive oil mist separator for large industrial equipment, COMS-1500/980 has become the preferred purification solution for gas turbines, large compressors and other equipment with strict German precision standards. Today, the original factory parameters are fully disclosed, accurately benchmarking industrial working conditions and rejecting vague expressions. Each set of data comes from original factory measurements and is suitable for core fields such as energy, power and petrochemicals!

Basic physical parameters (measured by the original factory, refused to estimate)

• Model: COMS-1500/980

• Shell size: Ø 400 × 763mm (compact design, suitable for narrow installation space)

• Column tube specification: 300mm (stable support, ensuring equipment operation stability)

• Total height: approximately 1524mm (suitable for installation dimensions of large industrial equipment)

• Net weight: up to approximately 80kg (balancing stability and installation convenience)

• Material: The internal components are made of aluminum alloy (no brass/copper) or all stainless steel, which is corrosion-resistant and durable, suitable for harsh industrial working conditions, and effectively resists complex environmental erosion such as acid, alkali, and high temperature

Connection and operating parameters (dual standard adaptation, suitable for industrial scenarios)

• Inlet flange: DN100 PN16/4 'ANSI 150lbs RF (dual adaptation to European and American standards to ensure connection sealing and interchangeability, compatible with industrial equipment interface standards in different regions)

• Exhaust port specifications: 2 'pipe joint (with internal thread) DN50 PN16 / 2' ANSI 150lbs RF， Adapt to different exhaust pipe requirements and flexibly match on-site installation conditions

• Work pressure: -0.2~0 bar (specially adapted for negative pressure conditions, suitable for the operation needs of large rotating machinery)

• Working temperature: ≤ 60 ℃ (suitable for high temperature operation scenarios of industrial equipment, stable)

Purification performance parameters (tested by IUTA)

• Separation efficiency: 99.98% (accurately capturing 0.1 μ m level oil mist aerosols without any fine oil mist penetration)

• Residual oil emissions:<0.1mg/m ³ (far superior to the German TA Luft Clean Air Act standard, can be directly discharged indoors)

• Filter cartridge specification: COMS-1500-S-50 fiberglass filter cartridge, inner diameter 50.8mm, length 476.0mm, filtration area 759cm ², compressive strength of about 60mbar

• Flow adaptation: Rated flow rate of 20m ³/h (ANR), can adapt to different flow requirements under different working conditions, and pressure loss is controlled within a reasonable range

Supporting and design parameters (factory standard, worry free and convenient)

• Factory standard: includes a set of filter cartridges, negative pressure gauge, negative pressure control handball valve, air intake filter, oil sight glass, can be installed and used immediately upon opening the box

• Optional configurations: Supports Ex/ATEX certification, redundant series (2 × 100%), integrated bypass, recirculation device, etc., suitable for special working conditions requirements

• Return oil design: supports built-in return oil pipeline adapter, achieving full closed-loop recovery of lubricating oil without resource waste