Construction of Qingdao Clean and Aseptic Room Factory

Construction of Qingdao Clean and Aseptic Room Factory

The construction of dust-free and sterile room factories is a systematic project that requires high precision and specifications. The core is to create a clean environment without dust, microorganisms, temperature, humidity, and pressure difference through standardized construction. It is widely used in industries such as biomedicine, sterile food, and electronic chips, directly determining product quality and production compliance. The entire construction process must strictly follow industry norms and technical standards.

Adequate preparation should be made in the early stage of construction to accurately control the foundation links. Firstly, the sterile level needs to be determined based on production requirements, combined with relevant industry standards, the construction plan and technical parameters should be clarified, and the reasonable layout of sterile areas, quasi sterile areas, and non sterile areas should be divided. Special channels for pedestrian and logistics should be reserved to avoid cross contamination. At the same time, do a good job in site cleaning and grassroots treatment to ensure that the ground is flat and free of cracks, laying the foundation for subsequent construction.

The main construction must strictly followThe principle of "top first, then wall, then floor" focuses on the details of aseptic protection. The enclosure structure is made of smooth, dust-free, and easy to clean color steel plates, and the joints are tightly sealed with sealant to prevent dust leakage from gaps; The ground is made of epoxy self leveling material, and the junction with the wall is treated with a circular arc to eliminate dead corners caused by dust accumulation. The air duct is made of corrosion-resistant and dust-free galvanized steel plate, and undergoes sealing testing after installation to avoid air leakage.

Aseptic assurance and debugging are key to construction. Install core equipment such as high-efficiency air filters, air shower rooms, and transfer windows to ensure that air circulation purification meets standards; Configure temperature, humidity, and pressure sensors to achieve real-time monitoring and automatic adjustment. After the construction is completed, it is necessary to carry outAfter 72 hours of air blowing and debugging, the suspended particles, microorganisms and other indicators will be tested by a third-party organization and can only be put into use after meeting the standards.

Throughout the construction process, on-site control measures must be taken to strictly prohibit dust pollution during construction. Construction personnel must wear sterile protective equipment, strictly follow operating procedures, and balance construction safety with easy maintenance in the later stage. A dust-free and sterile factory that meets standards and is stable and reliable must be created.Construction of Qingdao Clean and Aseptic Room Factory