Computer shielded cable

NegotiableUpdate on 04/01

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Usage feature 1: Rated voltage U0/U is 300/500V; The long-term working temperature of cable conductors: PVC has two types: 70 ℃ and 105 ℃; Polyethylene insulation at 70 ℃; Cross linked polyethylene insulation is 90 ℃ (insulation cross-linking types can be divided into silane cross-linking and irradiation cross-linking). 2. The cable can be fixedly laid under the condition of an ambient temperature of -40 ℃ to 50 ℃, and the ambient temperature during laying should not be lower than 0 ℃. 3. The bending radius of cables with copper tape shielding structure during laying should not be less than 10 times the outer diameter of the cable; When laying armored cables, the bending radius should not be less than 12 times the outer diameter of the cable; When laying other cables, the bending radius should not be less than 6 times the outer diameter of the cable.

Product Details

This product is suitable for connecting detection devices and instruments with high anti-interference requirements in electronic computer networks and control systems.
Production execution standards:
Adopting enterprise standards and referencing British standard BS5308

Properties
1. The rated voltage U0/U is 300/500V; The long-term working temperature of cable conductors: PVC has two types: 70 ℃ and 105 ℃; Polyethylene insulation is
70℃； Cross linked polyethylene insulation is 90 ℃ (insulation cross-linking types can be divided into silane cross-linking and irradiation cross-linking).
2. The cable can be fixedly laid under the condition of an ambient temperature of -40 ℃ to 50 ℃, and the ambient temperature during laying should not be lower than 0 ℃.
3. The bending radius of cables with copper tape shielding structure during laying should not be less than 10 times the outer diameter of the cable; When laying armored cables, the bending radius should be
Not less than 12 times the outer diameter of the cable; When laying other cables, the bending radius should not be less than 6 times the outer diameter of the cable.