Computer room air conditioning water softener

NegotiableUpdate on 09/19

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The fully automatic water softener series for computer room air conditioning uses the FLECK fully automatic softening control valve from PENTAIR Group in the United States. The air conditioning water softener in the computer room is assembled with high-quality fiberglass resin tanks. The entire equipment has the characteristics of high automation, small footprint, fast operation speed, stable effluent quality, strong corrosion resistance, and long service life.

Product Details

Brief introduction

The fully automatic water softener series for computer room air conditioning uses the FLECK fully automatic softening control valve from PENTAIR Group in the United States. The air conditioning water softener in the computer room is assembled with high-quality fiberglass resin tanks. The entire equipment has the characteristics of high automation, small footprint, fast operation speed, stable effluent quality, strong corrosion resistance, and long service life.

Computer room air conditioning water softener Detailed Introduction

Requirements for the use of the air conditioning water softener system in the computer room

1Inlet pressure: 0.2Mpa-0.6Mpa;
2. Residual hardness: ≤ 0.03mmol/L; Raw water hardness (calculated as 1/2Ca2+, 1/2Mg2+): ≤ 10.0mmol/L;

(Calculated as 1/2Ca2+, 1/2Mg2+)
3、电源： AC220V 、 50Hz 、 6W — 50W ；
4Computer room air conditioning water softenerWorking temperature: 2℃— 50℃；
5Reclaimed water consumption: 3% -5% * cycle water production volume;
6. The equipment outlet should be designed with a water storage tank and equipped with a water level control device;
7. Near the device (* not exceeding 3rice）There are drainage facilities;
8When the raw water quality meets the municipal tap water standards, normal selection can be made. If the water quality is unknown or untreated underground, a national water quality report is required, and our company can design a separate one for the customer;
9Computer room air conditioning water softenerThe processing capacity of a single set of equipment is 0.5T/H-150T/H. For models not listed in the table, please contact the company's engineering technology department directly.

Application Fields of Computer Room Air Conditioning Softener

Computer room air conditioning water softenerSuitable for humidifying equipment in communication rooms, precision air conditioning in switch rooms, air conditioning in network rooms, offices, computer rooms, archives rooms, gyms, reading rooms, electronic archives rooms, hotels, high-end office buildings, cinemas, art galleries, banks, museums, electrical and electronic precision processing workshops, etc. The series of fully automatic water softeners adopts the FLECK fully automatic softening control valve from PENTAIR Group in the United States. And assembled with high-quality fiberglass resin tanks. The entire equipment has the characteristics of high automation, small footprint, fast operation speed, stable effluent quality, strong corrosion resistance, and long service life.

[Main features and functions of the air conditioning water softener in the computer room]

■ Water production - When water containing calcium and magnesium ions (Ca2+, Mg2+) flows through a resin layer at a certain pressure and flow rate, the binding ability between calcium and magnesium ions (Ca2+, Mg2+) and the resin is greater than that between sodium ions (Na+) and the resin. Therefore, the calcium and magnesium ions (Ca2+, Mg2+) in the water exchange with the sodium ions (Na+) on the resin, and the calcium and magnesium ions (Ca2+, Mg2+) are adsorbed by the resin. In this way, the water flowing out of the resin layer no longer contains calcium and magnesium ions (Ca2+, Mg2+). 2RNa++Ca2+(Mg2+) ← Water production → Regeneration of R2Ca2+(Mg2+)+2Na+

Regeneration - When the sodium ions (Na+) on the resin are exchanged by the calcium and magnesium ions (Ca2+, Mg2+) in the water, the resin loses its exchange capacity and must be regenerated with salt water. The regeneration process mainly includes: backwashing, saline suction, slow flushing (replacement), fast flushing (positive flushing), saline re injection and other processes.

■ Backwash - After regeneration begins, use water to backwash the resin from bottom to top. Its purpose is to loosen the resin layer compacted in the water making process, which is conducive to the full contact between the resin particles and the salt solution, making the regeneration more thorough; 2. Suspended solids accumulated on the resin surface during the water production process.

■ Saltwater suction - Saltwater enters the resin tank from the salt tank through the "jet salt suction device" with a fully automatic control valve.

Slow flushing (displacement) - High concentration sodium ions (Na+) in saline exchange with calcium and magnesium ions (Ca2+, Mg2+) on the resin. After the calcium and magnesium ions (Ca2+, Mg2+) are exchanged, they are discharged with water. The sodium ions (Na+) in saline are adsorbed by the resin, and the resin regains its exchange capacity.

■ Quick wash (positive wash) - The purpose of quick wash (positive wash) is to remove residual salt solution in the resin layer and reduce chloride ions (Cl -).

■ Salt water re injection - During regeneration, the salt water in the salt tank is completely absorbed. Therefore, after regeneration, the water flow is controlled by a fully automatic control valve, and the salt tank is re injected with clean water to ensure the next regeneration use.