Computer horizontal friction and thrust testing machine

Introduction to testing machine:

Computer horizontal friction and thrust testing machineApplicable toThe force required for relative displacement between the two parts of the product structure in a flat state.It can be called friction or thrust. For example, the force value between the camera motor module and the outer frame. If the force value is large and there is displacement during focusing, it will generate unnecessary torque for the motor. And the thrust generated by the special test head when dragging flat products on the plane.

safety device

1. Travel protection: set as the beginning of upper and lower limit protection to prevent exceeding the preset travel;

2. Power protection: The system can be setMAXForce value, to prevent exceeding the sensor calibration value.

Test software description

The testing machine measurement and control system is designed specifically for microcomputer electronic testing machines and microcomputer press machines. Can conduct tensile, compressive, bending, shear, tear, and peel tests. adoptCollect, store, process, and print test results using a PC and interface board. computableMAX force, yield force, average peel strengthMAX deformation, yield point, elastic modulus and other parameters; Capable of curve processing, multi-sensor support, graphical interface, flexible data processing, and MS-ACCESS 2003 database support, making the system more powerful.

The measurement and control software adoptsVisual Studio development, supporting Windows XP/Win operating system;

Supports switching between multiple languages, and the database field display names of the experimental data are automatically translated following the selected text, making it easy to browse the data in local text and basically meeting the needs of the testing machine;

support3 types: SI international standard units, kg cm units, Lb Inch imperial units, 6 commonly used unit systems: N-mm-MPa、kN-mm-MPa、gf-cm-kgf/cm2、kgf-cm-kgf/cm2、Lb-Inch-kpsi、kP-Inch-kpsi, Easy switching of units. Meet the usage standards of different regions.

The use of optoelectronic isolation network communication interface has solved the problem of computer serial port or circuit board serial port damage caused by non common ground, and achieved hot plugging of computer and testing machine circuits.

The software adopts permission hierarchical management: tester level permission, test management permission, and testing machine manufacturer permission, which balances the convenience and security of use.

Computer horizontal friction testing machineTechnical Specifications

Capacity selection:1kg, 2kg, 5kg, 10kg, 20kg (optional set)

Control mode: fully computerized control mode, usingWindowa mode working platform, network communication link, with language switching between Simplified Chinese, Traditional Chinese, English, etc., capable of curve analysis, original database export, test report output, and switching at any speed.

The results show that:MAX peel force, minimum peel force, average peel force

Force sensor:S-type high-precision sensor

Unit of Strength:N、kN、gf、kgf、lbf、kP、tf(SI)、tf(long) 等

Length unit:Mm, cm, Inch, m, km, um, etc

Stress unit:Pa、Kpa、Mpa、Gpa、KN/ ㎡、N/㎡等

Load parameters: Test force measurement range 0.02% -100% full scale

Test force indication error: indicationWithin ± 0.05%

Test force resolution:MAXtest force1/500,000

accuracy classLevel 0.5

Displacement measurement accuracy: deformation accuracy ±0.05mm

Deformation resolution:1/500,000

Deformation measurement parameters: deformation accuracy ±0.05mm

Deformation resolution 1/500,000

speed parameter：test speed 1-500mm/min can be adjusted freely

speed and accuracy：±0.5%

valid itinerary：400mm

Experimental space：120mm

shutdown method：Left and right limit safety settings, specimen breakpoint sensing, overload shutdown, emergency stop buttonAutomatic reset function

Machine transmission：timing pulley+Ball screw

Machine power：400W

Use power supply：220V 50Hz

Machine dimensions：420mm（W）×380mm（D）×1080mm（H）

specificComputer horizontal friction and thrust testing machineFor detailed functions, please consult the connected testing equipment!