- Phone
-
Address
Jiaopu Industrial Park, Liangshan County, Jining City, Shandong Province
Product Categories
Huayi Second hand Oil Chemical Equipment Purchase and Sales Department
Common problems with recycling second-hand low-temperature evaporation heat pump concentration equipment
NegotiableUpdate on 05/12
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Common problems with recycling second-hand low-temperature evaporation heat pump concentration equipment, and special attention should be paid to key steps during manual operation to prevent equipment damage. $r $n1. Alarm Handling Standard Process $r $n Step 1: Emergency Pause: Immediately press the [Stop/Reset] button on the control panel and switch the operating mode to [Manual]. Step 2: Investigate the cause: Enter the touch screen main menu, view the 'Alarm Record', and accurately locate the cause of the alarm Step 3: Release and Restore: After eliminating the physical fault, press the [Stop/Reset] button again to clear the alarm state. Finally, switch the mode back to 'Auto' and restart the device.
Product Details
Common problems with recycling second-hand low-temperature evaporation heat pump concentration equipmentAt the same time, special attention should be paid to key steps during manual operation to prevent equipment damage.
1. Standard process for alarm handling
Step 1: Emergency Pause: Immediately press the 'Stop/Reset' button on the control panel and switch the operating mode to 'Manual'. Step 2: Investigate the cause: Enter the touch screen main menu, view the 'Alarm Record', and accurately locate the cause of the alarm
Step 3: Release and Restore: After eliminating the physical fault, press the [Stop/Reset] button again to clear the alarm state. Finally, switch the mode back to 'Auto' and restart the device.
2. Key operating specifications for manual mode
Vacuum pump shutdown specification: It is strictly prohibited to shut down the vacuum pump directly when operating it in manual mode. The vacuum pump can only be turned off after opening the vacuum exhaust valve and holding it for about 30 seconds. Mixing machine operation taboos: When operating the mixing machine, the and buttons cannot be touched or activated simultaneously.
Program running logic prompt:
Press' Stop/Reset 'while the device is running, and the program will pause. The device will continue to operate from the current process point during the next startup. If you need to restart the entire process, you need to click the [Reset] button on the touch screen and then perform the startup operation.
If you encounter any uncertain situations during operation, or if you still cannot solve the problem by following the above steps, please contact us immediately. The after-sales team of Floyd Technology provides 7 × 24-hour professional support, promising to respond within 2 minutes and arrive at the site within 24 hours to ensure the rapid recovery of your production.
Common problems with recycling second-hand low-temperature evaporation heat pump concentration equipment
Similar Product Recommend
