Cole Parmer peristaltic pump

Cole Parmer peristaltic pumpFeatures:

1Coleparmer Masterflex LS programmable peristaltic pump from the United States, brushless maintenance free motor, four digit LED display, Chinese operation menu (with 7 languages to choose from), programmable settings, keyboard locking function (to prevent misoperation), brushless maintenance free motor

2Can run in both directions, and the pump tube can be cleaned before and after operation

3Speed accuracy: ± 0.1%

4Reaching 0.01rpm at 100rpm;Reaching 0.1rpm at 600rpm

5Signal control: 0-20mA, 4-20mA, 0-10V, remote on/off, forward/reverse direction

615. 24, 35, and 36 are thick walled pump tubes with stronger suction, suitable for high viscosity liquids

7Multiple pump heads connected in series can increase flow rate:

Allow 2 pump heads to be connected in series with peristaltic pumps: 07522-20, 07551-00, 07575-10

Allow 4 pump heads in series peristaltic pumps: 07522-30, 07551-10

8Protection level:

IP33：07522-20、07522-30、07551-00、07551-10

IP66/NEMA 4X：07575-10、 07575-20 (316 stainless steel body, fully sealed keyboard, waterproof and dustproof, resistant to chemical corrosion, can directly rinse the entire pump with water and disinfectant)

9. ISO9001:2000 certification, ETL, CE standards

10Power supply: 90-260V, 1.1A

11External dimensions (length, width, height, cm): 25.4 × 21.6 × 21.6

The Chinese menu operation functions on the peristaltic pump are as follows (for all models):

1Can input the required flow rate and speed

2Multiple unit combinations to choose from: milliliters, liters, gallons, seconds, minutes, hours

3Select the pump tube size on the peristaltic pump (this locks in the flow range and increases accuracy)

4Can input the volume of liquid transferred in one run (any value between 0.001-9999 milliliters)

5You can input the interval time between every 2 runs (any value between 1 second -99 hours, 59 minutes, and 59 seconds)

6Enter the number of programming loops (any value between 1-9999)

7The peristaltic pump can store one set of calibration data for the flow rate of various sizes of pump tubes. You can calibrate your fluid based on this, as the specific gravity, usage environment, and viscosity of each liquid are different, which is important for the distribution of trace liquids

8The customer has 5000 2ml penicillin bottles that need to be filled. The masterflex peristaltic pump is used to transfer 2ml of liquid at once, with a 2-second interval between each transfer. The operation is repeated 5000 times

9Retraction setting, when the peristaltic pump stops, automatically rotates the pump head to prevent liquid dripping, avoid distribution errors or environmental pollution

1007575-10 Additional function: capable of storing a set of programming data, even when turned on or off, it still retains memory

In addition to the above functions, the peristaltic pump software also has the following enhanced features (limited to models 07551-00 and 07551-10 only):

1. The peristaltic pump software can simultaneouslyControl 25 peristaltic pumps (your computer requires multiple COM ports), suitable for diluting, mixing, titrating, and distributing various samples

2.Control the on/off/duration of each peristaltic pump for any time period or combination of multiple time periods, and even set the operating status for a certain day one year later according to the calendar on the software

3.Set the mixed operation direction of each pump, such as 2-minute forward transmission, 5-minute reverse operation, etc

4.The balance can be controlled simultaneously. When the balance reaches the set weight, a feedback signal is sent to the computer to stop the peristaltic pump, which can be synchronized with the conveyor belt

5.Can simultaneously control the mixer system, set the mixing speed, and achieve good mixing of sampleseffect

6.Each program has an additional 50 programming steps

For example, if a customer has 100 20 liter containers that need to be filled and requires 8 different raw materials to be filled in a certain proportion, the feeding speed or volume of each pump can be set through software. When the balance reaches a weight of 20 liters, the balance sends a signal to the computer, which controls the peristaltic pump to stop, and then the next conveyor belt goes to a new empty bucket to continue filling

7.Each run record can be set, in compliance with 21CFR Part 11 regulations: password protection and authorized user list, all operation tracking and review record documents, file encryption, only allowing authorized users to access

Cole Parmer peristaltic pumpparameter