Circulating magnetic stirring water bath

DK-20-8TCirculating magnetic stirring water bath

Main features of the product:

This instrument is a new product that combines a water bath and a magnetic stirrer, with two functions: water bath heating and magnetic stirring.

2. The heater adopts a special molding process, immersion ring heating, uniform heating, and is suitable for experiments at the same high temperature but different speed states.

3. Microcomputer controlled temperature RT-100 ℃, with an accuracy of ± 0.1 ℃.

4. The studio water tank is made of stainless steel material, which has corrosion resistance.

5. Adopting intelligent temperature control, accurate temperature control, and automatic temperature control.

To improve temperature control accuracy, digital display electronic technology is adopted.

7. Equipped with magnetic stirring technology, it can be used for stirring solutions or for water circulation, improving water temperature and uniformity control.

8. The device is easy to operate and safe to use.

9. Use program-controlled integrated voltage stabilizing and boosting circuit to ensure stable speed and not affected by voltage fluctuations.

10. The heater adopts a special molding process, immersion ring heating, and uniform heating.

DK-20-8TCirculating magnetic stirring water bath

Product Technical Parameters:

1. Power supply: 220V 50Hz

2. Temperature range: Room temperature+5100 ℃ Intelligent digital display constant temperature

3. Temperature resolution: 0.1 (PT100)

4. Constant temperature fluctuation: ≤± 0.5 ℃

5. Timing range: 0-9999min (temperature timing)

6. Heating power: 2000w, U-shaped wrap around heating tube

7. Pump flow rate: ≥ 10L/min;

8. Speed: Start -2000rpm/min Intelligent digital display constant speed,

9. Inner container size: 610 × 305 × 120mm (standard)

10. Number of job positions: 2 × 4=8

11. Maximum capacity of magnetic stirring: 8 × 1000ml

12. Water circulation method: internal circulation (standard)

13. Equipped with stainless steel cover for better insulation effect

14. Additional projects: 1. Low water level anti dry burning function; 2. Built in beaker fixing device,

Note: The height of the water bath can be adjusted and customized according to requirements, and this product can be made with internal and external circulation according to requirements.

Usage:

1. Before use, please carefully read the instructions, familiarize yourself with the instrument and control panel, and use a megohmmeter to measure whether there is any poor connection or short circuit in the power supply, plug, and grounding. This constant temperature heating solution uses distilled water and prohibits the use of river water and hard water. If tap water is used, the constant temperature pot should be cleaned after each use to prevent the accumulation of scale on the heater from affecting the constant temperature sensitivity.

2. When using, water must be added to the pot first, and then the power supply must be turned on. The digital temperature control meter displays the actual measured temperature. Set the desired temperature according to the instrument manual, and observe the reading until it reaches the desired set temperature value. When the set temperature value exceeds the temperature of the water, the heating indicator light will turn on, indicating that the heater has started working. When the temperature of the water reaches the desired temperature, the constant temperature indicator light will turn on and the heating indicator light will turn off.

3. When injecting water, please keep a distance of not less than 60mm to 80mm from the mouth of the water tank. When shutting down, please first turn off the circulation and heating switches, stir, and then turn off the power switch.

4. It should be noted that the water in the pot should not expose the electric heating tube to the water surface, in order to avoid burning out the electric heating tube and causing leakage.

5. Temperature setting: Press the SET key to set the temperature. Press the SET key to flash the data on the lower digital display (normal high temperature measurement on the upper display), indicating that the instrument has entered the temperature setting state. Press the △ key to increase the set value, press the ▽ key to decrease the set value, and continue to press the increase or decrease key to quickly change the set value. Press the SET key again to return the instrument to normal working state. The temperature setting is complete.

6. This instrument uses a 220V AC power supply. Please ensure that the rated current of the power socket is not less than 6A before use and that it has a safety grounding device (please connect the grounding device to the working room when using).

7. Connect the external power supply, turn on the power switch, and set the desired speed for the intelligent CNC speedometer.

Changzhou Gaode Instrument Manufacturing Co., Ltd. is a professional laboratory equipment manufacturer and a technology-based enterprise that integrates design, production, sales, and service. Strive to achieve perfection and serve people from all walks of life wholeheartedly throughout the entire process. Thank you for your attention! Welcome to further.