Chain Conveyor Series

A chain conveyor is a load-bearing chain that can be directly used as a conveying carrier or a higher load-bearing roller attachment can be added between each section of the chain to carry goods. And the chain slides along with the track by rolling with rollers. Due to the rolling contact between the rollers on the chain and the track, the frictional resistance is low, the power loss is low, and it can bear heavy loads. Its load capacity is related to the strength of the support, the size of the chain, the size and material of the rollers. Generally, we use precision large roller chains with pitch ranging from 19.05.4.1.8.5, and a load capacity of 1-10 tons. The length of a single line of a chain conveyor generally does not exceed 10 meters.

The chain conveyor is mainly composed of a head wheel, a tail wheel, a conveyor chain, a casing, and a driving device. Symmetrical L-shaped round steel is welded at regular intervals on the conveyor chain to carry animal materials. When the chain conveyor is working, the chain at the lower part of the conveyor moves forward, increasing the internal pressure of the material in the conveyor and the internal friction between the material particles. When the internal friction of the material is greater than the external friction between the material and the conveyor wall, the material moves forward continuously with the conveyor chain.

1. High conveying efficiency

The material flows as a whole in the groove of the chain conveyor, so the smaller groove space can transport a large amount of material, and the external dimensions of the equipment are correspondingly smaller.

2. Low energy consumption

This chain conveyor utilizes the internal friction force of the material for transportation, and there is no frictional movement between the conveyor chain and the casing. Under the same conveying capacity and longer conveying distance, the power consumption of this machine is about 40% lower than that of a screw conveyor.

3. Low failure rate

The rollers on the conveyor chain roll on the guide rail, and there is no friction between the conveyor chain and the casing. The chain is made of alloy steel through heat treatment processing, with a normal service life of about 3 years and a low failure rate during operation. There are no lubrication points in the conveyor except for the head and tail bearings.

Example display: