Carbon Analyzers

1. Product Introduction

KD-TS8 Carbon Analyzer uses original imported components, with higher measurement accuracy and a more stable new generation of carbon analyzer.  Built-in casting function database, suitable for the control of   on-the-spot elements for cast iron and ductile iron production. The rapid on-the-spot sample thermal analysis technology  is used to take the solidification temperature curve of the cast iron structure formation process as the measured object. The computer analyzes the solidification temperature curve to obtain the characteristic points of the curve under different components. The properties of molten iron such as carbon equivalent (CE%), carbon content (C%), silicon content (Si%), spheroidization rate (SG%), tensile strength (RM) were quickly measured according to the characteristic points of the curve. The detection time is about 1 minute and 30 seconds. Then the molten iron component is adjusted according to the automatically calculated amount of carbon increasers, ferrosilicon, and scrap steel. After obtaining the appropriate molten iron component, it is poured.   It greatly improves the yield rate, reduces the time of molten iron in the furnace, and alleviates the workload of the furnace workers. It effectively improves work efficiency and reduces inspection costs and time.

2. Main performance

1) Instrument specifications

Original imported temperature transmitter, military-grade motherboard, 21-inch LED true color widescreen displayer

Power supply: AC 220V 50Hz 100W

2) Measurement function

Iron grade, carbon equivalent, carbon content, silicon content, supercooling degree, spheroidization rate, tensile strength, etc.

Setting of target material and setting of molten iron weight

Automatically calculate the  amount of added carbon enhancers, ferrosilicon, and scrap steel

Automatically draw the change curves of carbon, silicon, carbon equivalent, initial crystal temperature and eutectic temperature

Saving and reproduction of data

3) Setting function: 10 inspection lines, 10 target components, inspection lines and target materials can be set.

4) Complementary function: calculate the supplementary amount based on the measurement results based on the target components, molten iron weight, and yield rate

5) Recording function: 10,000 measurement results can be recorded in the order of measurement time, and the process can be reproduced

6) Browse function: can browse the trend distribution map of the main measurement parameters for data analysis

7) Output function: The measurement records can be transferred to other computers via USB flash driver for review

3. Main technical parameters