CZ1237G-1 CZ1337G-1台式车床

Online Consult

Overview

Technical parameters
Project		CZ1237G-1	CZ1337G-1

Swing over bed	mm	φ305	φ350
Maximum turning diameter on the trailer	mm	φ173	φ215
Maximum turning diameter inside the saddle	mm	φ440	φ485
Bed rail width	mm	182	182
Maximum workpiece length (two tips)	mm	940	940
Taper of spindle bore		M.T.5	M.T.5
spindle bore	mm	φ38	φ38
Spindle speed series		9	9
Range of spindle speed	rpm	64~1500	64~1500
Spindle head		D1-4	D1-4
Metric		26kinds (0.4~7 mm)	26kinds (0.4~7 mm)
inch screw thread		34kinds(4~56T.P.I)	34kinds(4~56T.P.I)
Range of longitudinal feed rate	mm/r	0.052~1.392(0.002”~0.0548”)	0.052~1.392(0.002”~0.0548”)
Range of lateral feed rate	mm/r	0.014~0.38(0.0007”~0.0187”)	0.014~0.38(0.0007”~0.0187”)
Main screw diameter	mm	φ22(7/8”)	φ22(7/8”)
Main screw pitch		3mm or 8T.P.I	3mm or 8T.P.I
Sliding board box travel	mm	810	810
Cross slide travel	mm	150	150
Knife holder travel	mm	90	90
Tail frame sleeve travel	mm	100	100
Tail frame sleeve straight through	mm	φ32	φ32
Taper of tailstock sleeve	mm	M.T.3	M.T.3
Main motor power	Kw	1.1(1.5HP)	1.1(1.5HP)
Cooling pump motor power	Kw	0.04(0.055HP)	0.04(0.055HP)
host(Length×Width×Height)	mm	1780×750×760	1780×750×760
Bed foot(the left side) (Length×Width×Height)	mm	400×370×700	400×370×700
Bed foot(the right side) (Length×Width×Height)	mm	300×370×700	300×370×700
host	Kg	390/440	395/445
Bed foot	Kg	60/65	60/65
Packing		24pcs/20’container	24pcs/20’container

CZ1237G-1 desktop lathe | CZ1337G-1 desktop lathe

CZ1237G-1 desktop lathe | CZ1337G-1 small desktop lathe 1.3