Welcome Customer !

Membership

Help

Kunshan Shuangqiao Sensor Measurement and Control Technology Co., Ltd
Custom manufacturer

Main Products:

instrumentb2b>Products

CYG401 Flat Package High Frequency Pressure Sensor

NegotiableUpdate on 04/30
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin

Overview

1. Features and Applications: Non lumen fully flush structure, superior static performance and dynamic response capability, low noise, high resolution, high signal-to-noise ratio, with anti light interference, optional dual shielded twisted pair special anti-interference cable. This product can be used for various explosion shock wave measurements and dynamic pressure measurements.

Product Details

1. Features and Applications: Non lumen fully flush structure, superior static performance and dynamic response capability, low noise, high resolution, high signal-to-noise ratio, with anti light interference, optional dual shielded twisted pair special anti-interference cable. This product can be used for various explosion shock wave measurements and dynamic pressure measurements.

2. Pressure range: optional range within 0-1Mpa to 100Mpa

3. Natural frequency and rise time (available bandwidth: 0~1/3 natural frequency)

Range MPa
1 2 4 6 10 20 40 60
100
Natural frequency kHz 180 240 320 250 320 450 600 800 1000
Rise time μ m 1 1 0.5 0.5 0.5 0.3 0.3 0.2 0.2

4. Nonlinear: ± 0.2% to ± 1%

5. Accuracy level:

Grade/Indicator Drift at midnight
mv/8h
Zero temperature coefficient
X10-4FS/℃
Sensitivity temperature coefficient
X10-4FS/℃
Nonlinear
±%FS
Non repeatability and delay
%FS
JA 0.1 3 3 0.5(1.0*) 0.3
JB 0.1 2 2 0.2(0.5*) 0.1
MA 0.5 5 5 0.5(1.0*) 0.3
MB
0.15 3 3 0.2(0.5*) 0.2

Note: * is a range parameter above 40Mpa

6. Measurement of medium temperature: J-grade 0 ℃~450 ℃; M-grade 10 ℃~300 ℃ (can withstand 2000 ℃/200ms or 1000 ℃/1000ms under special measures)

7. Compensation temperature range: J-grade 30 ℃~100 ℃; M-grade 30 ℃~80 ℃. (can also be customized according to user requirements)

8. Anti light interference characteristics: J-level enhanced resistance to infrared and visible light; M-level resistance to natural visible light.

9. Installation interface: M20 × 1.5, thread depth 12mm

10. Outgoing methods: aviation plug, Hosman, direct outgoing three options (direct outgoing or aviation plug is recommended)

11. Power supply mode: constant voltage source or constant current source

12. Output mode: differential millivolt signal

13. Measurement medium: Non corrosive and non-conductive medium compatible with silicon and stainless steel (special measurement medium needs to be notified in advance)

14. Shell material: stainless steel

15. Cooling water pressure: not less than 300kpa, it is strictly prohibited to stop pressure or drop pipes during operation; Not exceeding 700kpa to prevent pipe bursting

16. Outline dimension diagram:

a1.jpg