CY10 rotary cleaning nozzle

NegotiableUpdate on 11/30

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Category: Cleaning nozzle Material: 316L, PTEF Working pressure: 3.4-20bar Working temperature: 200 ℉ (93 ℃) Angle: 360 °

Product Details

Design features

This product adopts external thread connection (standard G2 thread), usually connected to a spray rod with a flange.

During installation, connect the external thread of the cleaner to the internal thread on the spray rod to place the cleaner in the optimal cleaning position, and then install the flange of the spray rod.

Product Parameters

Work pressure: 3-20 bar	Working flow rate: 24-40m ³/h	最高温度：200℉ （93℃）
Material: 316L, PTEF	Cleaning cycle: 5-35 minutes	Minimum opening size:Φ280mm
Weight: 3.5KG	Maximum tank diameter: 50 feet (15.3 meters)	Entrance connection: 2 NPT or BSPT (M)
Mild cleaning diameter: 12-15.3	Moderate cleaning diameter: 6-7.5	Heavy cleaning diameter: 2.8-3.5
Cleaning solution medium: water, weak acid solution, weak alkali solution	Working principle: Gear reduction drive

Cleaning principle

When the cleaner is working, first confirm the direction and position of the four corner driven nozzles as shown in the figure. The axial and radial directions rotate simultaneously according to the set trajectory. While one nozzle cleans for one cycle, the other nozzle is intensively cleaned for one cycle, achieving 360 ° all-round cleaning without dead corners.

Application scenarios

Used for cleaning containers such as barrels, tanks, reaction vessels, mechanical equipment tanks, etc