CXBY fully automatic plate and frame filter press

Introduction to fully automatic plate and frame filter press:

Plate and frame filter press is a device used in industrial production to separate solids and liquids, and is applied in industries such as chemical, ceramic, petroleum, pharmaceutical, food, and smelting. Also applicable to industrial filtration wastewater treatment; Hydraulic type is an integrated system of mechanical, electrical, and hydraulic components. Using hydraulic equipment for compression and manual mechanical locking to maintain pressure. Easy operation and maintenance, safe and reliable operation. Working principle of plate and frame filter press: used for separating solids and liquids. The mud cake filtered by the filter press has a higher solid content and excellent separation effect.

fully automaticComponents of Plate and Frame Filter Press:

1、 The manual plate and frame filter press is composed of a filter frame, filter cloth, filter plate, and filter plate filter cloth, which form the filtering components and press the filtering part tightly(Handwheel, jack)The rack components and thrust plate end holes are respectively the feeding hole, washing liquid inlet hole, filtrate discharge collection hole, washing liquid discharge collection hole, etc. Install the pipeline according to the filter press model you have chosen.

2、 The hydraulic compression plate frame filter press consists of a main unit (frame and filter chamber), hydraulic components, and electrical components.

（1 ）Host part

The host consists of two crossbeams, with each end fixed to a thrust plate1And hydraulic cylinder seat11The two sides form the frame. On the left and right crossbeams8Vertically placed and arranged in sequence by filter frames3Filter plate4Filter cloth5Several filter chambers composed of components; And it can move horizontally along the crossbeam. Compression plate7Regarding the piston rod9Articulation. Driven by the hydraulic cylinder piston, it moves forward and backward, compresses the filter frame and filter plate, reaches the hydraulic working pressure, and then rotates the locking nut10Lock and maintain pressure. Turn off the motor again to filter the feed.

（2）Hydraulic components

Hydraulic components consist of hydraulic accessories (oil tank and oil filter), hydraulic pumps, valves, hydraulic cylinders, and pipelines.

Hydraulic oil needs to go through20μmAperture filtration, refueling to the upper limit of the liquid level line, electric motor drives the oil pump, and pressure oil enters the hydraulic cylinder through the solenoid valve; Push the piston to complete the compression and relaxation process of the filter chamber. The hydraulic working pressure values can be found in the inserts of each model specification

（3 ）Electrical components

The electrical components are installed on the right side of the fuel tank, and the control components are installed on the right side of the cylinder seat.

Working Principle Diagram

fully automaticFive advantages of plate and frame filter press:

① By using pneumatic valves to discharge slag, the labor intensity of workers can be effectively reduced;

② Without using filter cloth or filter paper, the cost of filtration can be greatly reduced;

③ Using a fully enclosed operation method, it is very environmentally friendly and there is no material loss;

④ When vibration causes slag to fall off, it can greatly reduce labor intensity to achieve continuous operation;

⑤ When filtering and dehydrating the residue and activated carbon in liquids, they can also replace the plate and frame filter very well, and are the primary equipment in the filtration industry.