CWS worm gear reducer
To customize non-standard worm gear reducers as needed, please consult: (WeChat synchronization)

Product Introduction

The CW series circular cylindrical worm gear reducer adopts a single machine worm gear reduction transmission, which complies with the industry recommended standard JB/T7935-95 (formerly the national standard GB9147-88), reaching the international level of the 1990s. The entire series includes three models, 16 center distances, and 12 speed ratios. The input power range is between 0.39~189KW, and the output torque is between 107~13500N. m.
The circular cylindrical worm shaft can operate in both forward and reverse directions, with an input speed not exceeding 1500r/min and a working environment temperature of -40~40 ℃. When
When the working environment temperature is below 0 ℃, the lubricating oil needs to be heated to above 0 ℃ before starting. When the working environment temperature is above 40 ℃, cooling measures need to be taken.

Model and center distance

This series of reducers includes:
CWU - Circular cylindrical worm gear reducer with worm gear under the worm wheel
CWS - Circular cylindrical worm gear reducer with worm gear on the side of the worm wheel
CWO - Circular cylindrical worm gear reducer with worm gear above the worm wheel

The models and center distances of this series of reducers are shown in the table below

Nominal transmission ratio

Tag Example