CS215 Temperature and Humidity Sensor

CS215 is a temperature and relative humidity probe that uses Swiss made digital humidity and temperature elements for accurate and stable measurements. This component is based on Sensirion's CMOSens technology, and the Sensirion SHT75 component is field replaceable, eliminating the downtime typically required for recalibration processes. This technology has been tested under high mountain conditions for over two years. CS215 outputs an SDI-12 signal, which can be measured by most data loggers.

When the sensor measures directly under sunlight, it is necessary toCS215 can only be measured by placing it in a 41303-5A radiation shield to avoid direct sunlight on the sensor surface. 41303-5A can be installed on the cross arm of CM202, CM204, or CM206. If the sensor is to be installed on a vertical rod, the U-bolt should be threaded through the side hole.

Advantages and characteristics

lAccurate and stable measurement

lOn site variable components allow for on-site recalibration

lEach sensor element has been individually calibrated, so there is no need to further adjust the probe

llow power consumption

lnumberSDI-12 output

lWide scope of work