-
E-mail
huadiansk@vip.163.com
-
Phone
15833622627
-
Address
Xingwan Industrial Zone, Xingtai City, Hebei Province
Product Categories
Xingtai Huadian CNC Equipment Manufacturing Co., Ltd
CNC horizontal machining center with 630 horizontal machining center, factory direct sales
NegotiableUpdate on 03/20
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Huadian CNC horizontal machining center, this machine tool is a dynamic column type (the head moves up and down, and the column moves back and forth, left and right) horizontal machining center. The tool magazine adopts a 24 disc type tool magazine and is equipped with a CNC equal division worktable. It can achieve one-time clamping of various complex parts such as boxes, shells, molds, etc., and complete various processes such as key, drilling, milling, expansion, hinge, tapping, etc.
Product Details
1、 Product Introduction and Usage:
This machine tool isThe horizontal machining center adopts a 24 disc type tool magazine and is equipped with a CNC equally divided worktable. It can achieve one-time clamping of various complex parts such as boxes, shells, molds, etc., and complete various processes such as key, drilling, milling, expansion, hinge, tapping, etc.
2、 Main structural features:
1. The main foundation components such as the base, workbench, column, crossbeam, sliding seat, and spindle box are made of HT300 cast iron, with a box type structure and a compact and reasonable symmetrical reinforcement structure to ensure the high rigidity and bending and shock absorption performance of the foundation components; The basic components are molded with resin sand and undergo sufficient aging treatment, providing a guarantee for the stability of the long-term performance of the machine tool.
● 2X. The Y and Z directions use large pitch, high-precision, and high-strength ball screws for feeding, with high feed speed; The servo motor is directly connected to the screw through an elastic coupling, and the feed servo motor directly transmits power to the high-precision ball screw to ensure the positioning accuracy of the machine tool;
3. The screw support adopts a special bearing for the screw and a pre stretched structure, greatly reducing the impact of thermal deformation on accuracy during long-term operation of the machine tool;
4. The X, Y, and Z direction guide rails and lead screws are all enclosed and protected to ensure the cleanliness of the lead screws and guide rails, and to ensure the transmission and motion accuracy of the machine tool;
5. The spindle box is equipped with an automatic balancing system to ensure the machining accuracy of the machine tool;
6. Adopting advanced centralized automatic lubrication device, timed and quantitative automatic intermittent lubrication, stable and reliable operation;
7. The machine tool can be equipped with domestic/imported CNC control systems, with complete functions, easy operation, stable accuracy, and reliability.
2、 Main structural features:
1. The main foundation components such as the base, workbench, column, crossbeam, sliding seat, and spindle box are made of HT300 cast iron, with a box type structure and a compact and reasonable symmetrical reinforcement structure to ensure the high rigidity and bending and shock absorption performance of the foundation components; The basic components are molded with resin sand and undergo sufficient aging treatment, providing a guarantee for the stability of the long-term performance of the machine tool.
● 2X. The Y and Z directions use large pitch, high-precision, and high-strength ball screws for feeding, with high feed speed; The servo motor is directly connected to the screw through an elastic coupling, and the feed servo motor directly transmits power to the high-precision ball screw to ensure the positioning accuracy of the machine tool;
3. The screw support adopts a special bearing for the screw and a pre stretched structure, greatly reducing the impact of thermal deformation on accuracy during long-term operation of the machine tool;
4. The X, Y, and Z direction guide rails and lead screws are all enclosed and protected to ensure the cleanliness of the lead screws and guide rails, and to ensure the transmission and motion accuracy of the machine tool;
5. The spindle box is equipped with an automatic balancing system to ensure the machining accuracy of the machine tool;
6. Adopting advanced centralized automatic lubrication device, timed and quantitative automatic intermittent lubrication, stable and reliable operation;
7. The machine tool can be equipped with domestic/imported CNC control systems, with complete functions, easy operation, stable accuracy, and reliability.
3、 Machine toolParameters/Configuration：
| specifications | HD-630 (Dividing Sheet Workbench) |
HD-631 (Division exchange workbench) |
HD-632 (Continuous Dividing Sheet Workbench) |
HD-633 (Continuous division exchange workbench) |
||
| workbenches | Workbench size | 630×700mm | 630×700mm | 630×700mm | 630×700mm | |
| Number of workbenches | 1 | 2 | 1 | 2 | ||
| Workbench division | 1°X360 | 1°X360 | 0.001° | 0.001° | ||
| Workbench transmission ratio | 240 | 240 | 160 | 160 | ||
| Exchange table transmission ratio | 240 | |||||
| Exchange platform structure type | rotary | rotary | ||||
| Workbench exchange time | 24s | 24s | ||||
| Maximum load of workbench | 950kg | 950kg | 950kg | 950kg | ||
| The form of the workbench | 24 × M16 threaded hole | 24 × M16 threaded hole | 24 × M16 threaded hole | 24 × M16 threaded hole | ||
| Maximum workpiece rotation diameter | ￠1100mm | ￠820mm | ￠1100mm | ￠820mm | ||
| trip | Inverted T-shaped layout | Workbench moves left and right (X direction) | 1050mm | 1050mm | 1050mm | 1050mm |
| Spindle box moves up and down (Y direction) | 750mm | 750mm | 750mm | 750mm | ||
| Column moves forward and backward (Z direction) | 900mm | 900mm | 900mm | 900mm | ||
| Spindle (Taiwan) Synchronous belt 1:1 transmission |
BT50 ring spray | Inner diameter of spindle bearing | 100mm | 100mm | 100mm | 100mm |
| Maximum speed | 6000rpm | 6000rpm | 6000rpm | 6000rpm | ||
| Distance from spindle centerline to worktable | 120～870mm | 0～750mm | 120～870mm | 0～750mm | ||
| Distance from the spindle end face to the center of the worktable | 130～1030mm | 130～1030mm | 130～1030mm | 130～1030mm | ||
| Screw specifications (Taiwan) | X direction, Y direction (diameter x lead) | 40×12 | 40×12 | 40×12 | 40×12 | |
| Z-direction (diameter x lead) | 50×12 | 50×12 | 50×12 | 50×12 | ||
| Fast moving speed | X direction, Y direction, Z direction | 24m/min | 24m/min | 24m/min | 24m/min | |
| B-axis | 10r/min | 10r/min | 10r/min | 10r/min | ||
| positioning accuracy | X direction, Y direction, Z direction | 0.01 (whole process) | 0.01 (whole process) | 0.01 (whole process) | 0.01 (whole process) | |
| B axis | 10″ | 10″ | 10″ | 10″ | ||
| repeatability | X direction, Y direction, Z direction | 0.006 (entire process) | 0.006 (entire process) | 0.006 (entire process) | 0.006 (entire process) | |
| B axis | 5″ | 5″ | 5″ | 5″ | ||
| Numerical Control System (Recommended motor) |
FANUC SIEMENS Mitsubishi |
X-direction servo motor | 22～30N.m | 22～30N.m | 22～30N.m | 22～30N.m |
| Y-direction servo motor (reporting) | 30N.m | 30N.m | 30N.m | 30N.m | ||
| Z-direction servo motor | 22～30N.m | 22～30N.m | 22～30N.m | 22～30N.m | ||
| B-axis servo motor | 8N.m | 8N.m | 12N.m | 12N.m | ||
| Spindle servo motor | 15～22KW | 15～22KW | 15～22KW | 15～22KW | ||
| APC servo motor | 8N.m | 8N.m | ||||
| Optical machine external dimensions | 3010×2690×2485 | 4225×2690×2485 | 3010×2690×2485 | 4225×2690×2485 | ||
| Net weight of optical machine | 8000kg | 9000kg | 8000kg | 9000kg | ||
| casting | The casting wood type adopts aluminum wood combination, resin sand casting, worktable HT300, and other HT250 | |||||
| Form of rail protection | Stainless steel guide rail cover for X and Z directions; Y-direction steel armor protective curtain | |||||
| Lubricating oil centralized recovery system | X, Y, Z directions | |||||
| Grating ruler interface | X direction, Y direction, Z direction, (B-axis continuous indexing worktable) | |||||
| Screw specific bearings (NSK) | X, Y, Z directions | |||||
| Lubrication methods for guide rails, lead screws, and specialized bearings for lead screws | Volumetric thin oil lubrication in X, Y, and Z directions | |||||
| Guide rail specifications (Taiwan) | X-axis and Y-axis heavy-duty 45 linear roller guide rail; Z-direction heavy-duty 55 linear roller guide rail | |||||
| Customer selection: | 1. All spindle types can be equipped with medium spray internal cooling spindle and ZF box. | |||||
| 2. Worktable interface with 5-way oil and 1-way gas-liquid pressure source (only applicable to indexing single workbench and continuous indexing single workbench). | ||||||
| 3. Vertical spindle box balancing system. | ||||||
1、 Product Introduction and Usage:
This machine tool isThe horizontal machining center adopts a 24 disc type tool magazine and is equipped with a CNC equally divided worktable. It can achieve one-time clamping of various complex parts such as boxes, shells, molds, etc., and complete various processes such as key, drilling, milling, expansion, hinge, tapping, etc.
2、 Main structural features:
1. The main foundation components such as the base, workbench, column, crossbeam, sliding seat, and spindle box are made of HT300 cast iron, with a box type structure and a compact and reasonable symmetrical reinforcement structure to ensure the high rigidity and bending and shock absorption performance of the foundation components; The basic components are molded with resin sand and undergo sufficient aging treatment, providing a guarantee for the stability of the long-term performance of the machine tool.
● 2X. The Y and Z directions use large pitch, high-precision, and high-strength ball screws for feeding, with high feed speed; The servo motor is directly connected to the screw through an elastic coupling, and the feed servo motor directly transmits power to the high-precision ball screw to ensure the positioning accuracy of the machine tool;
3. The screw support adopts a special bearing for the screw and a pre stretched structure, greatly reducing the impact of thermal deformation on accuracy during long-term operation of the machine tool;
4. The X, Y, and Z direction guide rails and lead screws are all enclosed and protected to ensure the cleanliness of the lead screws and guide rails, and to ensure the transmission and motion accuracy of the machine tool;
5. The spindle box is equipped with an automatic balancing system to ensure the machining accuracy of the machine tool;
6. Adopting advanced centralized automatic lubrication device, timed and quantitative automatic intermittent lubrication, stable and reliable operation;
7. The machine tool can be equipped with domestic/imported CNC control systems, with complete functions, easy operation, stable accuracy, and reliability.
2、 Main structural features:
1. The main foundation components such as the base, workbench, column, crossbeam, sliding seat, and spindle box are made of HT300 cast iron, with a box type structure and a compact and reasonable symmetrical reinforcement structure to ensure the high rigidity and bending and shock absorption performance of the foundation components; The basic components are molded with resin sand and undergo sufficient aging treatment, providing a guarantee for the stability of the long-term performance of the machine tool.
● 2X. The Y and Z directions use large pitch, high-precision, and high-strength ball screws for feeding, with high feed speed; The servo motor is directly connected to the screw through an elastic coupling, and the feed servo motor directly transmits power to the high-precision ball screw to ensure the positioning accuracy of the machine tool;
3. The screw support adopts a special bearing for the screw and a pre stretched structure, greatly reducing the impact of thermal deformation on accuracy during long-term operation of the machine tool;
4. The X, Y, and Z direction guide rails and lead screws are all enclosed and protected to ensure the cleanliness of the lead screws and guide rails, and to ensure the transmission and motion accuracy of the machine tool;
5. The spindle box is equipped with an automatic balancing system to ensure the machining accuracy of the machine tool;
6. Adopting advanced centralized automatic lubrication device, timed and quantitative automatic intermittent lubrication, stable and reliable operation;
7. The machine tool can be equipped with domestic/imported CNC control systems, with complete functions, easy operation, stable accuracy, and reliability.
3、 Machine toolParameters/Configuration：
| specifications | HD-630 (Dividing Sheet Workbench) |
HD-631 (Division exchange workbench) |
HD-632 (Continuous Dividing Sheet Workbench) |
HD-633 (Continuous division exchange workbench) |
||
| workbenches | Workbench size | 630×700mm | 630×700mm | 630×700mm | 630×700mm | |
| Number of workbenches | 1 | 2 | 1 | 2 | ||
| Workbench division | 1°X360 | 1°X360 | 0.001° | 0.001° | ||
| Workbench transmission ratio | 240 | 240 | 160 | 160 | ||
| Exchange table transmission ratio | 240 | |||||
| Exchange platform structure type | rotary | rotary | ||||
| Workbench exchange time | 24s | 24s | ||||
| Maximum load of workbench | 950kg | 950kg | 950kg | 950kg | ||
| The form of the workbench | 24 × M16 threaded hole | 24 × M16 threaded hole | 24 × M16 threaded hole | 24 × M16 threaded hole | ||
| Maximum workpiece rotation diameter | ￠1100mm | ￠820mm | ￠1100mm | ￠820mm | ||
| trip | Inverted T-shaped layout | Workbench moves left and right (X direction) | 1050mm | 1050mm | 1050mm | 1050mm |
| Spindle box moves up and down (Y direction) | 750mm | 750mm | 750mm | 750mm | ||
| Column moves forward and backward (Z direction) | 900mm | 900mm | 900mm | 900mm | ||
| Spindle (Taiwan) Synchronous belt 1:1 transmission |
BT50 ring spray | Inner diameter of spindle bearing | 100mm | 100mm | 100mm | 100mm |
| Maximum speed | 6000rpm | 6000rpm | 6000rpm | 6000rpm | ||
| Distance from spindle centerline to worktable | 120～870mm | 0～750mm | 120～870mm | 0～750mm | ||
| Distance from the spindle end face to the center of the worktable | 130～1030mm | 130～1030mm | 130～1030mm | 130～1030mm | ||
| Screw specifications (Taiwan) | X direction, Y direction (diameter x lead) | 40×12 | 40×12 | 40×12 | 40×12 | |
| Z-direction (diameter x lead) | 50×12 | 50×12 | 50×12 | 50×12 | ||
| Fast moving speed | X direction, Y direction, Z direction | 24m/min | 24m/min | 24m/min | 24m/min | |
| B-axis | 10r/min | 10r/min | 10r/min | 10r/min | ||
| positioning accuracy | X direction, Y direction, Z direction | 0.01 (whole process) | 0.01 (whole process) | 0.01 (whole process) | 0.01 (whole process) | |
| B axis | 10″ | 10″ | 10″ | 10″ | ||
| Repetitive positioning accuracy | X direction, Y direction, Z direction | 0.006 (entire process) | 0.006 (entire process) | 0.006 (entire process) | 0.006 (entire process) | |
| B-axis | 5″ | 5″ | 5″ | 5″ | ||
| Numerical Control System (Recommended motor) |
FANUC SIEMENS Mitsubishi |
X-direction servo motor | 22～30N.m | 22～30N.m | 22～30N.m | 22～30N.m |
| Y-direction servo motor (reporting) | 30N.m | 30N.m | 30N.m | 30N.m | ||
| Z-direction servo motor | 22～30N.m | 22～30N.m | 22～30N.m | 22～30N.m | ||
| B-axis servo motor | 8N.m | 8N.m | 12N.m | 12N.m | ||
| Spindle servo motor | 15～22KW | 15～22KW | 15～22KW | 15～22KW | ||
| APC servo motor | 8N.m | 8N.m | ||||
| Optical machine external dimensions | 3010×2690×2485 | 4225×2690×2485 | 3010×2690×2485 | 4225×2690×2485 | ||
| Net weight of optical machine | 8000kg | 9000kg | 8000kg | 9000kg | ||
| casting | The casting wood type adopts aluminum wood combination, resin sand casting, worktable HT300, and other HT250 | |||||
| Form of rail protection | Stainless steel guide rail cover for X and Z directions; Y-direction steel armor protective curtain | |||||
| Lubricating oil centralized recovery system | X, Y, Z directions | |||||
| Grating ruler interface | X direction, Y direction, Z direction, (B-axis continuous indexing worktable) | |||||
| Screw specific bearings (NSK) | X, Y, Z directions | |||||
| Lubrication methods for guide rails, lead screws, and specialized bearings for lead screws | Volumetric thin oil lubrication in X, Y, and Z directions | |||||
| Guide rail specifications (Taiwan) | X-axis and Y-axis heavy-duty 45 linear roller guide rail; Z-direction heavy-duty 55 linear roller guide rail | |||||
| Customer selection: | 1. All spindle types can be equipped with medium spray internal cooling spindle and ZF box. | |||||
| 2. Worktable interface with 5-way oil and 1-way gas-liquid pressure source (only applicable to indexing single workbench and continuous indexing single workbench). | ||||||
| 3. Vertical spindle box balancing system. | ||||||
Similar Product Recommend
