CLM-170B-8-CN CO2 incubator 170L cell culture

NegotiableUpdate on 05/07

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

CLM-170B-8-CN CO2 incubator 170L cell culture product introduction $r $nCLM-170B-CN uses a wet coating layer for heat treatment and sterilization of bacteria, with external protection and internal protection. The 0.2 μ m gas online filter, with the outer surface sprayed with IsocideTM antibacterial powder, is widely used in life science cell culture research in carbon dioxide incubators. Typical application areas include tissue engineering, in vitro fertilization, neuroscience, cancer research, and other mammalian cell research. Reliable performance, simple operation and design, Esco CelMate series CO2

Product Details

Name: Carbon dioxide incubator

Model: CLM-170B-8-CN

Brand: ESCO Singapore

CLM-170B-8-CN CO2 incubator 170L cell cultureProduct Introduction

CLM-170B-CN is equipped with an external formula for heat treatment and sterilization of bacteria using a wet coating layer, and is protected internally. 0.2 μ m gas online filter, with the outer surface coated with IsocideTM antibacterial powder

Carbon dioxide incubators are widely used in life science cell culture research. Typical application areas include tissue engineering, in vitro fertilization, neuroscience, cancer research, and other mammalian cell research.

Reliable performance, simple operation, andDesigned by Esco, the CelMate series carbon dioxide incubator provides cultivation conditions for various types of cells, helping you achieve your scientific dreams.

CLM-170B-8-CN CO2 incubator 170L cell cultureTechnical parameters:

Technical specifications	CLM-170B-8-CN	CLM-240B-8-CN
temperature control
Temperature Control Mode	Direct heating gas jacket type
Temperature range, ° C	Environmental temperature+3~60
Temperature control error, ° C	<± 0.3
Temperature uniformity, ° C	<± 0.3 ℃*
Display error	± 0.1 ℃
Temperature recovery time * * (1 minute after opening the door, parameter change is only 2% of the initial value)	6 mins
Working environment temperature range	18 ~ 36℃
CO2 concentration control
CO2 control system	PID microcomputer program control
CO2 concentration range,% CO2	0.1 - 19.9
CO2 control accuracy,% CO2	± 0.1
CO2 sensor	Infrared (IR) sensor
CO2 concentration recovery time * * * (1 minute after opening the door, parameter changes are only initial values)	Standard incubator (5-6 minutes)
humidity control
Humidification method	Humidifying plate
Humidity range * * * *,% RH	Can reach 95%***
noise
noise	≤65dB (A)
Technical Specifications
Internal cavity volume	170 L	240 L
Dimensions (width x depth x height)	660x660x900mm	750x770x900mm
Internal cavity size (width x depth x height)	505x530x635mm	595x640x633mm
Shipping weight	117kg	144kg
Shipping dimensions (width x depth x height)	850 x 720 x 1150 mm
Number of shelves	4
Maximum load per shelf layer	10 Kg per layer
power supply voltage	220 ±22 VAC, 50 ±1 Hz, 1Ф, 3.4 A
Maximum Power Consumption	372 Watts	1100 Watts
Power consumption at 37 ℃	80 Watts
internal structure	304 # stainless steel
pollution control The structure is a galvanized steel plate coated with ISOCIDETM antibacterial coating on the surface;
Pollution control methods	23) At a temperature of 90 ℃, the hot and humid air passes through the circulation loop and is eliminated by 0.2 μ m bacteria (when passing through the PA filter); sterilization
Pollution control methods	12) The main high temperature and humidity structure of the body at 90 ℃ is the application of hot surface circulation ring spray to eliminate bacteria S (OC identified by IDHEPAPM as resistant bacteria); Galvanized steel sheet with layers; 3) All incoming gases are sterilized through a 0.2 μ m online filter