Bulk density meter

1 LABULK0335Bulk density meterProduct usage:

Load the loose powder into a graduated cylinder and measure the volume of the sample. Fix the measuring cylinder onto the vibrating component. By using an eccentric wheel to move the bottom of the vibrating component according to the frequency and height specified in domestic standards, the measuring cylinder vibrates up and down, and the volume of powder inside the measuring cylinder will be reduced to varying degrees according to its own characteristics. Divide the sample mass by the volume after compaction to obtain the compacted density of the sample.

2、 Product Introduction:

LABULK0335 compaction density tester is an instrument used to measure the compaction density of powders. The instrument consists of a touch screen operation panel, vibration components, motor, printer, electronic balance, and measuring cylinder. The LABULK0335 vibrating density tester, developed according to domestic standards, operates at a set speed and vibrating height, causing the measuring cylinder containing the dry powder sample placed on the vibrating component to vibrate up and down, thereby measuring the vibrating density of the powder.

三、 LABULK0335Bulk density meterProduct parameters:

Measurement characteristics: vibration density and flowability, etc

Sample size: 5-250mL (user can freely set)

Timing range: 0-9999 seconds (users can freely set it)

Counting range: 0-9999 times (users can freely set)

Vibration height: 3 or 14mm (users can freely set it)

Vibration frequency: 250 or 300 revolutions per minute (users can freely set it)

Size: 33cm in length, 31cm in width, and 23cm in height (measuring cylinder height not included)

Voltage: 220V/50Hz

Weight: 16 kilograms

All * basic functions

The new generation intelligent operating system controls operations through a 7-inch LCD display screen.

The communication self-test function between the host and accessories allows the operator to have a clear understanding at a glance.

Choose one of the two measurement modes, and set the vibration time or number of vibrations freely.

Select the vibration height on the touch screen and automatically print it onto the report.

In addition to the preset speed, users can set any speed to meet special needs.

In addition to the preset vibration frequency, users can set any vibration to meet special needs.

Real time display of the instrument's operating parameters during the measurement process.

The use of rotational vibration makes it easier for operators to read volume data values and test results more accurate.

Connected to the electronic scale through RS-232 interface, displaying the electronic scale value in real-time.

With a gentle touch, it automatically prints and presents a detailed measurement report before your eyes.

It can be equipped with a high-resolution needle printer to save test results, changing the disadvantage of short data retention period of traditional thermal printers.

Measure the flowability of the powder while measuring the tap density.